Atur jumlah dan catatan
Stok Total: Sisa 3
Subtotal
Rp376.000
PRODUK TERLARIS GP2040-CE RP2040 BASIC BREAKOUT BOARD USB PASSTHROUGH WITH TERMINAL BLOCK FIGHTING CONTROLLER ARCADE STICK DIY HITBOX PICO PS5 XBOX READYY
Rp376.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
BARANG SELALU READY!!LANGSUNG DI ORDER SAJA
Sudah Terinstall Terminal Block! Memudahkan installasi dalam pembuatan Arcade Stick / Hitbox.
Untuk Kabel dan Accesories DIY lain ada di etalase kami!
4 Pin Harness Cable
https://www.tokopedia.com/arcadebliss/4-pin-harness-button-cable-wire-jst-ph-to-2-8mm-connector-sanwa-hitbox-kabel-skun-to-arduino-diy-joystick-hitbox-for-gp2040-ce-pico
Dupont Connector to 2.8
https://www.tokopedia.com/arcadebliss/button-cable-wire-duppont-to-2-8mm-connector-sanwa-hitbox-kabel-skun-to-arduino-diy-joystick-hitbox-for-gp2040-ce-pico
The RP2040 Basic Breakout Board - Passthrough is designed to be an affordable option to get going with the GP2040-CE firmware.
The Passthrough version adds a USB port to the side so that it can be used to autheticate on PS4, PS5 and Xbox via passthrough authentication. Please read more on PS5 compatibility via GP2040-CE website.
You can find a pre-compiled .UF2 firmware file for the RP2040 Basic Breakout Board in the GP2040-CE release section under `GP2040-CE_0.X.X_RP2040AdvancedBreakoutBoardUSBPassthrough.uf2`. This configuration will be maintained as long as the project is active and the pinout will not change. Should there be another version of the board, it will be kept as a seperate hardware entry. Since this uses the same pinout as the Advanced Breakout Board you can use that .UF2.
Copyright 2023 [TheTrain] (https://github.com/TheTrainGoes)
https://github.com/OpenStickCommunity/Hardware/tree/main/Boards/GP2040-CE%20Official%20Boards/RP2040%20Basic%20Breakout%20Board/RP2040%20Basic%20Breakout%20Board%20-%20Passthrough
*Toko TERPERCAYA karena KUALITAS dan PACKING
*Berkualitas Tinggi
*Bukan Produk Murahan
*Double-Checking Product
*Packing AMAN
*Jaminan 100% uang kembali jika Produk tidak sesuai foto dan deskripsi
Sudah Terinstall Terminal Block! Memudahkan installasi dalam pembuatan Arcade Stick / Hitbox.
Untuk Kabel dan Accesories DIY lain ada di etalase kami!
4 Pin Harness Cable
https://www.tokopedia.com/arcadebliss/4-pin-harness-button-cable-wire-jst-ph-to-2-8mm-connector-sanwa-hitbox-kabel-skun-to-arduino-diy-joystick-hitbox-for-gp2040-ce-pico
Dupont Connector to 2.8
https://www.tokopedia.com/arcadebliss/button-cable-wire-duppont-to-2-8mm-connector-sanwa-hitbox-kabel-skun-to-arduino-diy-joystick-hitbox-for-gp2040-ce-pico
The RP2040 Basic Breakout Board - Passthrough is designed to be an affordable option to get going with the GP2040-CE firmware.
The Passthrough version adds a USB port to the side so that it can be used to autheticate on PS4, PS5 and Xbox via passthrough authentication. Please read more on PS5 compatibility via GP2040-CE website.
You can find a pre-compiled .UF2 firmware file for the RP2040 Basic Breakout Board in the GP2040-CE release section under `GP2040-CE_0.X.X_RP2040AdvancedBreakoutBoardUSBPassthrough.uf2`. This configuration will be maintained as long as the project is active and the pinout will not change. Should there be another version of the board, it will be kept as a seperate hardware entry. Since this uses the same pinout as the Advanced Breakout Board you can use that .UF2.
Copyright 2023 [TheTrain] (https://github.com/TheTrainGoes)
https://github.com/OpenStickCommunity/Hardware/tree/main/Boards/GP2040-CE%20Official%20Boards/RP2040%20Basic%20Breakout%20Board/RP2040%20Basic%20Breakout%20Board%20-%20Passthrough
*Toko TERPERCAYA karena KUALITAS dan PACKING
*Berkualitas Tinggi
*Bukan Produk Murahan
*Double-Checking Product
*Packing AMAN
*Jaminan 100% uang kembali jika Produk tidak sesuai foto dan deskripsi
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan