KingSener 088796 088789 088772 080841 Bluetooth Speaker Wireless Speaker Battery For BOSE Soundlink Mini 2 7.4V 2600mAh/19.24WH

Specification:
Capacity:2600mAh/19.24WH (Extended capacity)
(100% fully compatible with the standard verison with 2330mAh)
Voltage:7.4V
Battery Type: Li-ion
Cell: 2 Cells ,made in Korea, good quality and fully compatible ,100% test before shipment
Color:Black
Condition:Replacement Battery  (100% Brand New,1 year warranty!)
Replace Part Numbers:
088796  088772 088789 080841 2ICR19/65
Compatible Laptop Models:
For BOSE Soundlink Mini II/2 Speaker
For Bose Soundlink Mini II/2 Wireless Speaker
For Bose Mini II/2 Bluetooth Portable Wireless Speaker
Note: Not For Bose SoundLink Mini I/1
The battery does not come with a power board, you need to DIY soldering the power board on this new battery before used normally .
Photos:
High Capacity/Extended Capacity
2600mAh A++CELLS
No Fake Capacity
KingSener battery's full charge capacity is not lowerthan design capacity. We won't be fake
But usually the low quality battery has a virtual standard which is lower than design capacity.
The shell adopts PC+ABS Fireproof
Accurate 1:1 mold perfectly match with your Speaker
Product Details
Model Number: 088796
Output Voltage: 7.4V
Capacity: 2600mAh/19.24WH
High-quality interface connector makes output stable and durable
Strong environmentally
friendly ABS+PC shell
Our battery doesn't come with a power board,you need to keep the old power board of your battery to DIY soldering on the new battery
Replacement Battery For Bose Mini II/2 User Manual
How to Install The Battery:
1. Remove the battery and the small circuit board connected, please note that the battery small circuit board is connected to the main board and the power amplifier small circuit board at the same time, there are two sockets,at a right angle, be careful when pulling.
2. Take out the battery and circuit board, and use the multimeter to test the new battery to ensure that the battery can be used normally.You can also connect the wire to the machine for testing first. After showing normal charging and discharging,