Castle Creations 1/5 Scale 2028-800KV 4-Pole Sensored Brushless Motor

Technical Specs Input Voltage Range: 12S MAX Kv: 800 Max. RPM: 45,000 Size: Length: 4.4 #34; (112.7mm) Diameter: 2.2 #34; (56.3mm) Weight (w/wires): 44 oz./1.25kg Shaft Size: Length: 30mm Diameter: 8mm Mounting Hole Specifications: 4mm @ 30mm Cooling Fan: Available, but not included. See 011-0019-00 here. Connectors: 8.0mm male connectors Items Needed for Operation: Compatible Electronic Speed Control (ESC) (see Recommended ESC(s) below) Product Use Statements: Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC. Application Guidelines: The 2028-800KV is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. We recommend applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. Recommended ESC(s): Mamba XL X Mamba Monster X 8S, Mamba xl x 2 (requires changing bullets to 6.5mm) Max. Recommended Vehicle Weight: 4WD vehicles weighing less than 25lbs. 2WD vehicles weighing less than 30lbs. Tech Notes: Running modes: Sensorless and Sensored