ADESILEX PG2 TG

Two-component thixotropic epoxy adhesive for structural bonding WHERE TO USE Structural repair, bonding and reinforcement of concrete elements, natural stone, mortar and brick. Some application examples • Structural reinforcement of beams and pillars by bonding steel (beton plaqué method) or composite material (e.g. Carboplate) plates to concrete. • Non-flexible structural bonding of precast concrete elements. • Sealing injectors and surface damage before injection of Epojet LV by low-pressure pump. • Sealing large cracks and repairing joint corners in industrial flooring subject to traffic. • Bonding fibre-reinforced cement slabs and pipes. • Waterproofing large size joints by bonding TPE strips (e.g. Mapeband TPE) to concrete. TECHNICAL CHARACTERISTICS Adesilex PG2 TG is a two-component product based on epoxy resins, selected fine-grain aggregates and special additives according to a formula developed in the MAPEI research laboratories. After mixing Adesilex PG2 TG (part A) with its hardener (part B), a thixotropic mix, easy to apply even on vertical structures in thicknesses up to 1 cm in a single layer, is obtained. Once prepared, Adesilex PG2 TG hardens by chemical reticulation alone without shrinkage. It becomes a compound with exceptional bonding and mechanical strength. Adesilex PG2 TG is especially suitable for applications in temperatures between +25°C and +50°C.