5.0/ 5.0
100% pembeli merasa puas
294 rating • 61 ulasan
5(284)96.6%
4(10)3.4%
3(0)0%
2(0)0%
1(0)0%
PZEM-017 100A
Atur jumlah dan catatan
Stok: 124
Subtotal
Rp198.000
PZEM-017 DC Communication Box RS485 Interface Modbus Voltage Ampere Energy Power Meter Peacefair - PZEM-017 100A
Rp198.000
Pilih variasi: PZEM-017 100A
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: ELECTRICAL MEASURING INSTRUMENTS
Peacefair DC 0-300V 100A Current Voltage Tester RS485 Modbus Power Energy Meter Digital Wattmeter Car voltmeter with 100A shunt
This document describes the specification of the PZEM-003/017 DC communication module, the module is mainly used for measuring DC voltage, current, active power, frequency and energy consumption, the module is without display function, the data is read through the RS485 interface.
PZEM-017: Measuring Range 50A、100A、200A、300A (the current range is depend on the external shunt specification )
Please click this link to download the software and the user manual.
Link: chat penjual..!
1. Working voltage: 0.05 ~300VDC
2. Test voltage: 0.05 ~300VDC
3. Rated power: 0.02A-300A/0.2-90kW
4. Measurement accuracy: 1.0 grade
Function and Display format
1 Voltage
1.1 Measuring range:0.05-300V. (when the test voltage is ＜7V, please use the independent power supply mode)
1.2 Resolution:0.01V.
1.3 Measurement accuracy:1%.
2 Current
2.1 Measuring range:0.01-10A(PZEM-003);0.02-300A(PZEM-017;can be matched with 50、100、200、300A four kinds of shunt).
2.2 Resolution:0.01A
2.3 Measurement accuracy:1%
3 Power
3.1 Measuring range:0.2-90kW(PZEM-017)
3.2 Resolution: 0.1W
3.3 Measurement accuracy:1%
4 Energy Consumption
4.1 Measuring range: 0-9999kWh
4.2 Resolution: 1Wh
4.3 Measurement accuracy:1%
Reset energy: use software to reset.
Over Voltage alarm
Voltage threshold can be set, divide into high voltage and low voltage threshold, when the measured voltage exceeds the threshold, it can alarm
The default high voltage threshold is 300V, the default low voltage threshold is 7V.
Communication interface
RS485 interface.
Communication protocol
Physical layer protocol
Physical layer use UART to RS485 communication interface.
Baud rate is 9600, 8 data bits, 2 stop bit, no parity.
Other instructions
1 RS485 interface is passive output, need external connect 5V power supply and the the external power supply should ＞100mA.
2 When the input test voltage is less than 7V, it must supply 5V independent work voltage through MICRO USB port；
Note: Do not use the USB port bring by your PC to be the independent power supply, otherwise it may damage your PC !
Working temperature
-20’C ~ +60’C
This document describes the specification of the PZEM-003/017 DC communication module, the module is mainly used for measuring DC voltage, current, active power, frequency and energy consumption, the module is without display function, the data is read through the RS485 interface.
PZEM-017: Measuring Range 50A、100A、200A、300A (the current range is depend on the external shunt specification )
Please click this link to download the software and the user manual.
Link: chat penjual..!
1. Working voltage: 0.05 ~300VDC
2. Test voltage: 0.05 ~300VDC
3. Rated power: 0.02A-300A/0.2-90kW
4. Measurement accuracy: 1.0 grade
Function and Display format
1 Voltage
1.1 Measuring range:0.05-300V. (when the test voltage is ＜7V, please use the independent power supply mode)
1.2 Resolution:0.01V.
1.3 Measurement accuracy:1%.
2 Current
2.1 Measuring range:0.01-10A(PZEM-003);0.02-300A(PZEM-017;can be matched with 50、100、200、300A four kinds of shunt).
2.2 Resolution:0.01A
2.3 Measurement accuracy:1%
3 Power
3.1 Measuring range:0.2-90kW(PZEM-017)
3.2 Resolution: 0.1W
3.3 Measurement accuracy:1%
4 Energy Consumption
4.1 Measuring range: 0-9999kWh
4.2 Resolution: 1Wh
4.3 Measurement accuracy:1%
Reset energy: use software to reset.
Over Voltage alarm
Voltage threshold can be set, divide into high voltage and low voltage threshold, when the measured voltage exceeds the threshold, it can alarm
The default high voltage threshold is 300V, the default low voltage threshold is 7V.
Communication interface
RS485 interface.
Communication protocol
Physical layer protocol
Physical layer use UART to RS485 communication interface.
Baud rate is 9600, 8 data bits, 2 stop bit, no parity.
Other instructions
1 RS485 interface is passive output, need external connect 5V power supply and the the external power supply should ＞100mA.
2 When the input test voltage is less than 7V, it must supply 5V independent work voltage through MICRO USB port；
Note: Do not use the USB port bring by your PC to be the independent power supply, otherwise it may damage your PC !
Working temperature
-20’C ~ +60’C
Ada masalah dengan produk ini?