4.8/ 5.0
92% pembeli merasa puas
25 rating • 20 ulasan
5(21)84%
4(2)8%
3(2)8%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 16
Subtotal
Rp36.000
6 Pin USB 2.0 to TTL UART Module Serial Converter CP2102 STC
Rp36.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Aksesoris Komputer
CB Dimensions: 26.5* 15.6mm.
With 3.3V and 5V dual power output
With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
With self-recovery fuse. In the event of accidental short circuit, it can effectively protect your computer USB port and Downloader
With reset signal output, etc. directly to the Arduino board Promini download!
Supported operating systems:
Windows 98/Me/2000/7
MAC OS-9
MAC OS
X-Windows CE
Linux 2.40 or later
Feature:
Brand new and high quality
Included USB transceiver, without external circuit device
Includes a clock circuit and power-on reset circuit
Meet the USB2.0 specification requirements
SUSPEND pin supports USB suspend state
Asynchronous serial data bus compatible with all handshake and modulation controller interface signals.
Supported data format is 8 data bits, 1 stop bit and parity bits.
Connotation 512 byte receive buffer and 512 byte transmit buffer.
Supports hardware handshaking or X-ON/X-OFF.
Isi Paket:
1 x 6 Pin USB 2.0 to TTL UART Module Serial Converter CP2102 STC Replace FT232 Module.
With 3.3V and 5V dual power output
With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
With self-recovery fuse. In the event of accidental short circuit, it can effectively protect your computer USB port and Downloader
With reset signal output, etc. directly to the Arduino board Promini download!
Supported operating systems:
Windows 98/Me/2000/7
MAC OS-9
MAC OS
X-Windows CE
Linux 2.40 or later
Feature:
Brand new and high quality
Included USB transceiver, without external circuit device
Includes a clock circuit and power-on reset circuit
Meet the USB2.0 specification requirements
SUSPEND pin supports USB suspend state
Asynchronous serial data bus compatible with all handshake and modulation controller interface signals.
Supported data format is 8 data bits, 1 stop bit and parity bits.
Connotation 512 byte receive buffer and 512 byte transmit buffer.
Supports hardware handshaking or X-ON/X-OFF.
Isi Paket:
1 x 6 Pin USB 2.0 to TTL UART Module Serial Converter CP2102 STC Replace FT232 Module.
Ada masalah dengan produk ini?