Atur jumlah dan catatan
Stok Total: 200
Subtotal
Rp917.800
Naze32 10DOF Rev6 Full with Mag and Baro Sensor Black Straight Side
Rp917.800
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Mainan Hobi
Naze32 Rev6 10DOF, below is description:
The popular Naze32 is here! Initially designed for use with small to mid-sized multirotor craft, it has become the go-to controller for a host of Multirotor projects and propheads.
THIS IS THE PERFECT 250 SIZE MINI QUAD FLIGHT CONTROLLER!
The infamous Hamasaki AKA timecop was not happy with the limitations and performance an 8-bit MCU could deliver on current FC platforms, so he set out to make a flight controller that could take just about any demands a developer could throw at it, and thus was born the Naze32. At the heart of the Naze32 is a 32bit ST micro work horse of a processer, with untapped memory and u power and a host of equally impressive sensors. The Naze is also matched up with some of the nicest GUI programs and features to get the most out of your configuration.
The Naze32 comes as the most complete Acro Version yet, with both strait and 90deg pins for your preference and a matched break out harness.
Features:
Flexible motor outputs, support various airframe types:
Quad/Hexa/Tri/Bi/Y4/Y6/Octo/Camera Gimbal. (Default is Quad-X)
Up to 8 ch RC input - supports standard receivers (PWM), PPM Sum receiver (FrSky, etc), or Spektrum satellite receivers.
Built in FrSky telemetry inverter (shared w/main port)
Battery voltage monitoring
Modern 32-bit processor running at 3.3V/72MHz (STM).
Onboard MicroUSB for setup and configuration
LEDs so bright, they could blind you
MultiWii-based configuration software for easy setup
Rev 6 hardware
Spesifikasi:
36x36 mm (30.5mm Mounting)
5.3 grams (no headers, 7.3 grams with)
2000 degrees/second 3-axis MEMS gyro
Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense
Isi Paket:
1 pcs Naze32 Flight Controller 10DOF
1 set Pins
1x RC breakout cable (send the cable color at random)
1x Plastic case
10 DOF (pro) is with compass and baro
SKU : 3131/1066961639815430144/55
The popular Naze32 is here! Initially designed for use with small to mid-sized multirotor craft, it has become the go-to controller for a host of Multirotor projects and propheads.
THIS IS THE PERFECT 250 SIZE MINI QUAD FLIGHT CONTROLLER!
The infamous Hamasaki AKA timecop was not happy with the limitations and performance an 8-bit MCU could deliver on current FC platforms, so he set out to make a flight controller that could take just about any demands a developer could throw at it, and thus was born the Naze32. At the heart of the Naze32 is a 32bit ST micro work horse of a processer, with untapped memory and u power and a host of equally impressive sensors. The Naze is also matched up with some of the nicest GUI programs and features to get the most out of your configuration.
The Naze32 comes as the most complete Acro Version yet, with both strait and 90deg pins for your preference and a matched break out harness.
Features:
Flexible motor outputs, support various airframe types:
Quad/Hexa/Tri/Bi/Y4/Y6/Octo/Camera Gimbal. (Default is Quad-X)
Up to 8 ch RC input - supports standard receivers (PWM), PPM Sum receiver (FrSky, etc), or Spektrum satellite receivers.
Built in FrSky telemetry inverter (shared w/main port)
Battery voltage monitoring
Modern 32-bit processor running at 3.3V/72MHz (STM).
Onboard MicroUSB for setup and configuration
LEDs so bright, they could blind you
MultiWii-based configuration software for easy setup
Rev 6 hardware
Spesifikasi:
36x36 mm (30.5mm Mounting)
5.3 grams (no headers, 7.3 grams with)
2000 degrees/second 3-axis MEMS gyro
Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense
Isi Paket:
1 pcs Naze32 Flight Controller 10DOF
1 set Pins
1x RC breakout cable (send the cable color at random)
1x Plastic case
10 DOF (pro) is with compass and baro
SKU : 3131/1066961639815430144/55
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan