Atur jumlah dan catatan
Stok Total: 132
Subtotal
Rp773.000
Flipsky Wireless Bluetooth Module 2.4G For Vesc&Vesc Tool Electric Skateboard For V4
Rp773.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Flipsky Wireless Bluetooth Module 2.4G for VESC&VESC Tool Electric Skateboard for V4
1005006289583938
? Pre-Order +/- Sampai Alamat 10-15 Hari
? FREE ONGKIR+PAJAK
?? Garansi uang kembali jika Rusak, Beda Produk
Origin : Mainland China
Kindly Reminder: This bluetooth module can only support Android mobile device.
Used to communicating between the VESC and VESC Tool (mobile) over BLE. Note that the UART port on the VESC must be enabled with a baud rate of 115200 for this to work. The UART port on VESC can work only under 115200 baud
Operating voltage: 2.0V ~ 12V Onboard Chip: NRF51822
Actual use distance: The distance to communicate with VESC is about 15 meters
Frequency range: 2.4GHz
2.4 GHz multiprotololl RF receiver
ARM Cortex-M0 32 bit processor
256kB flash & 16kB RAM
PCB size:27mm x 13mm
2.0mm seven-pin four-wire connector length:90mm
Antenna length:145mm
net weight:3.5g
Type: Suitable for V4
Colour: Black
Material: composite material
Package Contents:
1 x Skateboard Bluetooth Module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Kindly Reminder: This bluetooth module can only support Android mobile device.
Used to communicating between the VESC and VESC Tool (mobile) over BLE. Note that the UART port on the VESC must be enabled with a baud rate of 115200 for this to work. The UART port on VESC can work only under 115200 baud
Operating voltage: 2.0V ~ 12V Onboard Chip: NRF51822
Actual use distance: The distance to communicate with VESC is about 15 meters
Frequency range: 2.4GHz
2.4 GHz multiprotololl RF receiver
ARM Cortex-M0 32 bit processor
256kB flash & 16kB RAM
PCB size:27mm x
wajib membuat vidio unboxing
1005006289583938
? Pre-Order +/- Sampai Alamat 10-15 Hari
? FREE ONGKIR+PAJAK
?? Garansi uang kembali jika Rusak, Beda Produk
Origin : Mainland China
Kindly Reminder: This bluetooth module can only support Android mobile device.
Used to communicating between the VESC and VESC Tool (mobile) over BLE. Note that the UART port on the VESC must be enabled with a baud rate of 115200 for this to work. The UART port on VESC can work only under 115200 baud
Operating voltage: 2.0V ~ 12V Onboard Chip: NRF51822
Actual use distance: The distance to communicate with VESC is about 15 meters
Frequency range: 2.4GHz
2.4 GHz multiprotololl RF receiver
ARM Cortex-M0 32 bit processor
256kB flash & 16kB RAM
PCB size:27mm x 13mm
2.0mm seven-pin four-wire connector length:90mm
Antenna length:145mm
net weight:3.5g
Type: Suitable for V4
Colour: Black
Material: composite material
Package Contents:
1 x Skateboard Bluetooth Module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Kindly Reminder: This bluetooth module can only support Android mobile device.
Used to communicating between the VESC and VESC Tool (mobile) over BLE. Note that the UART port on the VESC must be enabled with a baud rate of 115200 for this to work. The UART port on VESC can work only under 115200 baud
Operating voltage: 2.0V ~ 12V Onboard Chip: NRF51822
Actual use distance: The distance to communicate with VESC is about 15 meters
Frequency range: 2.4GHz
2.4 GHz multiprotololl RF receiver
ARM Cortex-M0 32 bit processor
256kB flash & 16kB RAM
PCB size:27mm x
wajib membuat vidio unboxing
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan