Beam Detector 1224 System Sensor / Notifier Original

BEAM DETECTOR

Brand: SYSTEM SENSOR/NOTIFIER BY HONEYWELL
Type: BEAM 1224
Made in: USA

Specifications
OPERATIONAL SPECIFICATIONS
Protection range: 16 to 230 feet (5 to 70 m), 230 to 328 feet
(70 to 100 m) using optional BEAMLRK kit.
Adjustment angle: ±10° horizontal and vertical. Note that the
optics move independently of the unit.
Sensitivity (6 levels):
• Level 1 — 25%.
• Level 2 — 30%.
• Level 3 — 40%.
• Level 4 — 50%.
• Acclimate Level 5 — 30% to 50%.
• Acclimate Level 6 — 40% to 50%.
Fault condition (trouble):
• 96% or more obscuration blockage.
• In alignment mode.
• Improper initial alignment.
• Self-compensation limit reached.
Alignment aid:
• Optical gunsight.
• Integral signal strength indication.
• Two-digit display.
Indicators:
• Alarm — local red LED and remote alarm.
• Trouble — local yellow LED and remote trouble.
• Normal — local flashing green LED.
Test/reset features:
Integral sensitivity test filter (BEAM1224S only, requires external power supply).
• Sensitivity filter (incremental scale on reflector).
• Local alarm test switch.
• Local alarm reset switch.
• Remote test and reset switch (compatible with RTS151 and
RTS151KEY test stations).
Smoke detector spacing: On smooth ceilings, 30 – 60 feet
(9.1 to 18.3 m) between projected beams and not more than
one-half that spacing between a projected beam and a sidewall. Other spacing may be used depending on ceiling height,
airflow characteristics, and response requirements. See NFPA
72.
ENVIRONMENTAL SPECIFICATIONS
Temperature: –22°F to 131°F (–30°C to 55°C).
Humidity: 10 – 93% RH noncondensing.
ELECTRICAL SPECIFICATIONS
Voltage: 10.2 to 32 VDC (BEAM1224); 15 to 32 VDC
(BEAM1224S).
Standby current (24 VDC): 17 mA maximum.
Alarm current (24 VDC): 38.5 mA maximum.
Alignment mode current (24 VDC): 28 mA maximum.
Test mode current (BEAM1224S only): 500 mA maximum @
peak test.
Relay contacts: 0.5 A @ 30 VDC.
Reset time: 0.3 seconds maximum.
Start-up time (after 2 min. reset): 60 seconds max.