Amplifier QSC SPA SPA2-200

QSC SPA2-200 Amplifiers

Features:
- Up to 200 watts per channel into 4 and 8 ohms — the outputs of the SPA2-200 model are designed to provide up to 200 watts per channel into Low-Z loads.
- ENERGY STAR qualified amplifier — The ENERGY STAR qualified SPA amplifiers employ an efficient class-D design to conserve energy and reduce operational cost.
- Bridgeable outputs for higher power — Bridging the outputs of the SPA2-200 will deliver up to 350 watts into 70V or 100V when bridged.
- Auto-Ramp provides quiet startup and power-down — The ENERGY STAR auto-ramp circuitry ensures quiet and fast power up from standby and seamless power-down following 25 minutes of inactivity, dramatically reducing power consumption.
- Rack-mountable 1U, half rack width enclosure — The SPA amplifers can be mounted in 1 RU, 1/2 rack space, and their clever joining brackets enable easy under-table and wall-mounting

Stereo Mode Watts Per Channel
8 Ω dynamic, both channels are driven: 200W
4 Ω dynamic, both channels are driven: 200W
Bridged Mode Watts per channel:
8 Ω & 4 Ω: 400W
70 V & 100 V: 350W
Signal to Noise (A-weighted, 20 Hz-20 kHz): >100 dB
Input Sensitivity: 1.23 Vrms (+4 dBu)
Maximum Voltage Gain: 25.0 dB
Output Circuitry: Class D
Frequency Response (20 Hz - 20 kHz): Frequency Response (20 Hz - 20 kHz)
Input Impedance: >10 kΩ (balanced), >10 kΩ (unbalanced)
Maximum Input Level: 12.3V (+24 dBu)
Highpass Filter: Switchable 80 Hz when Bridged in 70V & 100V
Front Panel Indicators: Power, per channel Signal, per channel Protect/Limit
Controls: 4Ω/8Ω/70V Bridge Highpass On/100V Bridged Highpass On per channel pair
Dimensions (HWD) inches: 1.7 x 8.7 x 9.5 / 1RU
Dimensions (HWD) mm: 43 x 220 x 241 / 1RU
Weight (Net): 4.0 lb / 1.4 kg
Agency Approvals: UL, CE, ENERGY STAR, RoHS/WEEE compliant, FCC Class B (Conducted and Radiated emissions), UL 2043 witd PL-Kit
Carton Contents: Power cable, quick start guide, connector kit, rack mount ears, mounting brackets