Automobile Fault V1.5 Scanner Obd2 OBDII Car Fault Detector Code

Special Features : Bluetooth Origin : Mainland China Item Type : Code Readers amp; Scan Tools Certification : WEEE Features: 1. Firmware Version V1.5 (Supports more protocols SAE J1850 than V2.1). 2. With chip: PIC18F25K80, supports all functions, in the program identifier, it shows full functions. 3. It understands commands such as ATPPS and others. 4. The frequency of the crystal oscillator is 4mHz. Main Functions: With proper software installed in the host device, you may have the following parameters read out from your vehicle: Vehicle Speed RPM Fuel Consumption Engine Coolant Temp Fuel Pressure Calculated Engine Load Throttle Position Intake Manifold Pressure Air Intake Temp Timing Advance Mass Air Flow Fuel Level Barometric Pressure EVAP System Pressure Fuel Trim Specification: Name: Car Detector Packing Size: about 10*7*5cm/3.94*2.76*1.97in Support Protocols: 1.SAE J1850 PWM(41.6Kbaud) 2.SAE J1850 VPW(10.4Kbaud) 3.ISO9141-2(5 baud init,10.4Kbaud) 4.ISO14230-4 KWP(5 baud init,10.4 Kbaud) 5.ISO14230-4 KWP(fast init,10.4 Kbaud) 6.ISO15765-4 CAN(11bit ID,500 Kbaud) 7.ISO15765-4 CAN(29bit ID,500 Kbaud) 8.ISO15765-4 CAN(11bit ID,250 Kbaud) 9.ISO15765-4 CAN(29bit ID,250 Kbaud) Supported cars: If your vehicle does not fall into any of the above categories, look under the hood and try to locate a label that explicitly states that the vehicle was designed to with -2 legislation. This usually can work on most new cars with 16pin Adapter and 12V engine: For USA Car brand, after 1996; For Europe Car brand(petrol),after 2001; For Europe Car brand(),after 2004; For Japan Car brand, after 2002; For Korea Car brand, after 2010; For Chinese Car brand, after 2009; For In