TP-LINK CPE610 5GHz 300Mbps 23dBi Outdoor CPE - TP LINK CPE 610

Interface :l 1 10/100Mbps Shielded Ethernet Port (LAN/POE) 1 Reset Button Power Supply: Passive Power over Ethernet via LAN (+4,5pins; -7,8pins) Voltage range: 16-27VDC Antenna Gain 23dBi Antenna Beamwidth 9(Azimuth), 7(Elevation) Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Material: Outdoor PC stabilized plastic Weatherproof: IP65 water and dust proof design Frequency 5.15~5.85GHz Transmit Power Max. 27dBm power by 1dBm Network Configuration: WAN: Static/Dynamic/PPPoE/L2TP/PPTP LAN: Static/Dynamic/DHCP Forwarding: ALG/UPnP/Virtual Server/Port Trigger Security: SPI Firewall/ Ping Forbidden/DoS Protection Access Control Static Routing Bandwidth Control IP amp; MAC Binding Wireless Configurations: Pharos MAXtream TDMA Technology Selectable Channel Width: 5/10/20/40MHz Auto Channel Selection Transmit Power Control Dynamic Frequency Selection DFS WDS Enable/Disable 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging AP Mode only Distance/ACK Timeout Setting MAC Address Filter Advanced: Beacon Interval/RTS Threshold/Fragmentation Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management: Discovery and Remote Management via Pharos Control application Web-based management System log SNMP Agent v2c Ping Watch Dog Dynamic DDNS SSH Server System Tools: Indicators:Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations: Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog Certification CE, FCC, IC, RoHS, IP65 Package Contents: Outdoor Wireless CPE 24V 0.5A Passive PoE Adapter Pole Mounting Straps AC Power Cord Installation Guide