SKF TMHP 10E Hydraulic Jaw Bearing Puller Kit – Kit Treker Bearing Hidrolik

The TMHP 10E is a complete puller kit for bearing dismounting. The kit includes three different arm sets that can be used in a 2-arm or 3-arm configuration. The puller uses a hydraulic spindle for easy dismounting with dismounting forces up to 100 kN (11.2 US ton). With a stroke of 80 mm (3.1 in.), the spindle facilitates dismounting in one operation. Safety is supported through a self-locking arms that reduce puller slippage under load, a spring-loaded centre point to enable easy spindle centring and a safety valve to prevent puller overload.

• Fitur Hydraulic Puller Kit:

- Versatile kit with three different arm lengths usable in 2-arm or 3-arm configuration
- Effortless dismounting with hydraulic spindle
- Self-locking arms minimise risks of slippage under load
- Spring-loaded centre point allows easy puller centring
- Supplied with three hydraulic spindle extension pieces to allow quick adaptation to required pulling length
- Hydraulic spindle is equipped with safety valve to prevent puller overload
- Recommended applications: For dismounting of bearings, gears, pulleys and other industrial ring shaped components in industrial, construction and agricultural applications with an interference fit on the shaft. Can be used as two armed puller if space around the component is restricted.

• Spesifikasi Teknis SKF TMHP 10E:

- Workpiece outer diameter range, using arms:
-- Set 1: 75 to 170 mm
-- Set 2: 80 to 250 mm
-- Set 3: 110 to 280 mm
- Reach, using arms (max): Set 1: 115 mm; Set 2: 160 mm; Set 3: 200 mm
- Claw height: 8 mm
- Claw length: 15 mm
- Claw width: 25 mm
- Hydraulic spindle, piston stroke: 80 mm
- Puller adaptor thread: UN 1.5 x 16 tpi
- Total spindle length: 655 mm (incl. 3 available extension pieces)
- Suitable for workpiece dismounting from a Cylindrical seating (straight shaft): Yes
- Suitable for bearing dismounting from a Tapered seating (conical shaft): Yes
- Suitable for bearing dismounting from a Sleeve (adapter or withdrawal sleeve): Yes
- Suitable for workpiece dismounting from a Blind arrangement (housing with shaft): No
- Suitable for workpiece dismounting from a Housing: No
- Suitable for bearing type(s): All
- Dismounting force generation: Hydraulic spindle (TMHS 100)
- Special features:
-- Centring and self-locking system for firm grip of the component
-- Useable as 2 or 3 armed puller
-- Provided with 3 different arm sets
-- Provided with various spindle extension pieces to quickly adapt the reach
-- Hydraulic spindle with integrated safety valve for safer use
- Pulling force (max): 100 kN
- Total number of arms in kit: 3 sets of 3
- Arms:
-- Set 1 (TMHP 10E-10) with arm length 190 mm
-- Set 2 (TMHP 10E-11) with arm length 240 mm
-- Set 3 (TMHP 10E-12) with arm length 285 mm
- Spindle nose piece: yes, 30 mm
- Material: Alloy engineering steels, hardened and tempered
- Coating: Black phosphated, Hydraulic spindle with trivalent chromium parts
- Recommended storage temperature: 5.0 – 40.0 C
- Relative humidity: max 75%
- Case dimensions (l x h x w): 580 x 410 x 70 mm
- Product net weight: 15 kg

• Paket Produk:

1 x arm-assembly stand
3 x arms, set 1 (TMHP 10E-10)
3 x arms, set 2 (TMHP 10E-11)
3 x arms, set 3 (TMHP 10E-12)
1 x hydraulic spindle TMHS 100 (with handle bar)
3 x extension pieces for hydraulic spindle: 50, 100, 150 mm
1 x nosepiece with centre point for hydraulic spindle
IFU QR Code card
Case

Arber Tools — Perkakas Industri Tepercaya
Ready stock & terima pemesanan khusus. Produk berkualitas, asli, bergaransi. Kirim cepat, dukungan teknis ramah.