HSGQ-1G-T Copper SFP 1G/10G Ethernet Electrical Port Module For FTTX Network Solution - 1G

HSGQ-1G-T Copper SFP 1G/10G Ethernet Electrical Port Module For FTTX Network Solution

GARANSI RESMI 12 bulan

HSGQ-1G-T Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps datarate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.

Power Consumption: Low-power modules reduce overall energy consumption and help reduce device heat generation.
Interface Type: Ethernet electrical port modules usually have standard RJ-45 interfaces, which can be connected to Ethernet devices (such as switches, routers, computers, etc.).
Compatibility: Ethernet electrical interface modules generally comply with the IEEE 802.3 standard and therefore can be used with a variety of compatible devices and systems.
Reliability: High-quality Ethernet electrical interface modules usually have good reliability and stability, and can provide consistent performance over long periods of operation.
Transmission Rate: Ethernet electrical port modules usually support different transmission rates, the most common is 10/100/1000Mbps (gigabits per second), also known as Gigabit Ethernet or Gigabit Ethernet.

Technical Parameters :
Transmission Media : CAT.5E
Transmission Distance : 100m
Transmission Rate : 1000Mbps
Port Type : RJ45
Operating Voltage : 3.3V
Case Operating Temperature : 0℃ ~ 70℃