Atur jumlah dan catatan
Stok Total: 170
Subtotal
Rp4.547.700
ADT-Link R43SG-TB3 PCIe x16 PCI-e x16 to TB3 Extension Cable PCI-Express Cables eGPU Adapter
Rp4.547.700
- Kondisi: Baru
- Waktu Preorder: 28 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
ADT-Link R43SG-TB3 PCIe x16 PCI-e x16 to TB3 Extension Cable PCI-Express Cables eGPU Adapter
Deskripsi :
Package : No
Model Number : R43SG-TB3
Type : PCI-E Riser
Brand Name : ADT-Link
Origin : Mainland China
Certification : NONE
Products Status : STOCK
Except for laptops, this product also supports Intel NUC motherboards, STX motherboards, ITX motherboards, and Graphics card external use.
ADT-Link R43SG-TB3 PCIe x16 PCI-e x16 to TB3 Extension Cable PCI-Express Cables eGPU Adapter
Brand name: ADT-LINK
Product name: PCIe x16 to TB3 extension cable
Product model: R43SG-TB3
Transfer speed: PCIe3.0 x4 , 32G/bps (Full speed)
Wire length: 25cm, 50cm
Graphics card compatibility: Support new graphics cards that have been out of the factory in the past three years.
Application: eGPU for NUC / ITX / STX / Notebook PC (Only supports thunderbolt3 interface, does not support USB interface).
Package included 1pcs 30cm Thunderbolt 3 type-c cable
Note:
1. The length can be customized, if you need, please contact us.
2. R43SG-TB3 is the Thunderbolt 3 version, Support M.2 NVMe Thunderbolt 3 external box, supports PCIe3.0x4 full speed.
Cable EMI shielding Description:
EMI Shielding with Conducting Polymer
The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.
Cable Length Description:
R3G series cable length has 25 cm or 50 cm can be selected, the following is the line length of 50 cm. refer to the blue dimension of the figure below.
Power Supply Description:
Supporting power supply is DELL DA-2 8PIN (D220P-01/ADP- 220AB)12V/18A/220W PSU, or above ATX 500W standard PSU power supply. The power supply should be prepared by the buyer or purchased separately.
24P_ATX and 4P_CPU power input, Dual 8P_GPU power output.
DELL DA-2 8PIN Input. Dual 8P_GPU power output.
Product accessories, enclosed with the following graphics card power cord below
SW1, Power Forced Start Switch, 1 for automatic startup, 2 for forced startup, please cut to 1 for automatic startup.
SW2, PERST # signal delay switch, 1 delay 2.2 seconds, 2 delay 4.5 seconds, with eGPU software, for graphics card compatibility optimization, the current software does not support, please cut to 1
SW3, CLKRUN # signal delay switch, 1 is closed, 2 is delayed for 9 seconds, with eGPU software, for graphics card compatibility optimization, the current software does not support, please cut to 1
J1, PERST # signal delay switch, OPEN to open delay function, SHORT to close delay function, the current software does not support, please insert the jumper cap SHORT.
J2, CLKRUN_Capacitance Delay, currently the software does not support, only for R&D engineers plug in capacitance adjustment delay testing. It takes about 2.2 seconds to insert a 1uF capacitor, 5 seconds to insert a 2.2u capacitor, and so on.
Installation steps:
1. Install the hexagonal copper pillar and insert the graphics card into the PCIe x16 slot. The screw is tightened so that the graphics card will not shake or fall off.
2. Install ATX power supply or DELL power supply, including graphics card power cord should also be connected, after installed, DELL power supply will light orange lights.
3. You can plug in the TB3 cable when the computer is on. After connecting, the ATX power supply will automatically start the fan to turn. If you use the DELL power supply, the green light will turn on. At this time, the R3G board will turn on two green lights. The system will recognize the card automatically. Please install the graphics card driver. The installation of the driving process may prompt the computer to restart.
4. finish.
Installation video file download:
What are the laptops and Graphics Cards supported by R43G? Is there any way to use it normally?
The laptop must have an
.
Deskripsi :
Package : No
Model Number : R43SG-TB3
Type : PCI-E Riser
Brand Name : ADT-Link
Origin : Mainland China
Certification : NONE
Products Status : STOCK
Except for laptops, this product also supports Intel NUC motherboards, STX motherboards, ITX motherboards, and Graphics card external use.
ADT-Link R43SG-TB3 PCIe x16 PCI-e x16 to TB3 Extension Cable PCI-Express Cables eGPU Adapter
Brand name: ADT-LINK
Product name: PCIe x16 to TB3 extension cable
Product model: R43SG-TB3
Transfer speed: PCIe3.0 x4 , 32G/bps (Full speed)
Wire length: 25cm, 50cm
Graphics card compatibility: Support new graphics cards that have been out of the factory in the past three years.
Application: eGPU for NUC / ITX / STX / Notebook PC (Only supports thunderbolt3 interface, does not support USB interface).
Package included 1pcs 30cm Thunderbolt 3 type-c cable
Note:
1. The length can be customized, if you need, please contact us.
2. R43SG-TB3 is the Thunderbolt 3 version, Support M.2 NVMe Thunderbolt 3 external box, supports PCIe3.0x4 full speed.
Cable EMI shielding Description:
EMI Shielding with Conducting Polymer
The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.
Cable Length Description:
R3G series cable length has 25 cm or 50 cm can be selected, the following is the line length of 50 cm. refer to the blue dimension of the figure below.
Power Supply Description:
Supporting power supply is DELL DA-2 8PIN (D220P-01/ADP- 220AB)12V/18A/220W PSU, or above ATX 500W standard PSU power supply. The power supply should be prepared by the buyer or purchased separately.
24P_ATX and 4P_CPU power input, Dual 8P_GPU power output.
DELL DA-2 8PIN Input. Dual 8P_GPU power output.
Product accessories, enclosed with the following graphics card power cord below
SW1, Power Forced Start Switch, 1 for automatic startup, 2 for forced startup, please cut to 1 for automatic startup.
SW2, PERST # signal delay switch, 1 delay 2.2 seconds, 2 delay 4.5 seconds, with eGPU software, for graphics card compatibility optimization, the current software does not support, please cut to 1
SW3, CLKRUN # signal delay switch, 1 is closed, 2 is delayed for 9 seconds, with eGPU software, for graphics card compatibility optimization, the current software does not support, please cut to 1
J1, PERST # signal delay switch, OPEN to open delay function, SHORT to close delay function, the current software does not support, please insert the jumper cap SHORT.
J2, CLKRUN_Capacitance Delay, currently the software does not support, only for R&D engineers plug in capacitance adjustment delay testing. It takes about 2.2 seconds to insert a 1uF capacitor, 5 seconds to insert a 2.2u capacitor, and so on.
Installation steps:
1. Install the hexagonal copper pillar and insert the graphics card into the PCIe x16 slot. The screw is tightened so that the graphics card will not shake or fall off.
2. Install ATX power supply or DELL power supply, including graphics card power cord should also be connected, after installed, DELL power supply will light orange lights.
3. You can plug in the TB3 cable when the computer is on. After connecting, the ATX power supply will automatically start the fan to turn. If you use the DELL power supply, the green light will turn on. At this time, the R3G board will turn on two green lights. The system will recognize the card automatically. Please install the graphics card driver. The installation of the driving process may prompt the computer to restart.
4. finish.
Installation video file download:
What are the laptops and Graphics Cards supported by R43G? Is there any way to use it normally?
The laptop must have an
.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan