Arduino GPS Shield NEO-6M + Micro SD Slot + Antenna

NOTE :
-SETIAP PEMBELIAN DIATAS 200 RIBU, GRATIS 1 BUAH CD BERISI BANYAK PROJECT UNTUK PRAKTIKUM LENGKAP DENGAN SOURCODE DAN SKEMATIK NYA.
-DAN MASIH BANYAK LAGI MODUL PRAKTIKUM LAINNYA.
-MODUL PRAKTIKUM AKAN DIKIRIM VIA EMAIL, JIKA MEMESAN SERTAKAN EMAIL.
sangat cocok untuk yang ingin belajar.

Deskripsi Produk
- Power Supply: 3.3 ''" 5V DC
- Current: 30mA, max. spike 100mA
- Interface: UART
- Default Baud Rate: 9600 bps
- Update rate: 1Hz (Default), 5Hz (Max)
- Size: 53 x 60 mm
- GPS Cable length: ~280cm (~9ft aprox)
- Weight: 23g (shield only), 55g (gps antenna + cable)
- Concurrent reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou)
- EEPROM for saving the configuration data when powered off
- On board 3V super capacitor as backup battery
- On board 3.3v regulator, 3.3V and 5V logic level compatible
- Power and fix indicator LEDs
- Reset Button
- External GPS antenna

Pin Label In/Out Board Connection Pin Description
GND In Ground GPS module ground (0V reference)
SD_CS In Arduino D8 Enable the SD card operation
RX In Arduino D0-D7 Serial data input
TX Out Arduino D0-D7 Serial data output
FIX Out GPS Fix LED GPS fix indicator ''" blink once a fix is valid
VBAT In rechargeable battery Backup power ''" keeps the RTC running (2.0-4.3V input range)
3V3 In On-board 3.3V regulator 3.3V power supply input

link :
- u-center for Windows -> http://www''u-blox''com/en/evaluation-tools-a-sof...
- TinyGPS++ Arduino GPS library -> https://github''com/mikalhart/TinyGPSPlus
- Official website -> duinopeak''com/node/29

paket :
- 1 x NEO-6M GPS Shield for Arduino
- 1 x External GPS Antenna with cable