5.0/ 5.0
100% pembeli merasa puas
2 rating • 1 ulasan
5(2)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 100000
Subtotal
Rp36.600
Modul Wireless NRF24L01 + PA + LNA 1100m dengan Antenna
Rp36.600
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: MODUL KOMUNIKASI
NOTE :
-SETIAP PEMBELIAN DIATAS 200 RIBU, GRATIS 1 BUAH CD BERISI BANYAK PROJECT UNTUK PRAKTIKUM LENGKAP DENGAN SOURCODE DAN SKEMATIK NYA.
-DAN MASIH BANYAK LAGI MODUL PRAKTIKUM LAINNYA.
-MODUL PRAKTIKUM AKAN DIKIRIM VIA EMAIL, JIKA MEMESAN SERTAKAN EMAIL.
sangat cocok untuk yang ingin belajar.
Features:
Includes on board support components and the RFX2401C which is the PA (Power Amplifier) and LNA (Low-Noise Amplifier).
A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI).
Configuration registers are accessible through the SPI connection.
Configurable parameters include frequency channel (125 selectable channels) output power and data rate (data rates: 250kbps 1Mbps and 2Mbps).
On chip voltage regulator accepts supply voltages from 1.9 to 3.6V.
V tolerant inputs allows for direct connection of SPI pins to the Arduino.
Internal filtering results in high margins of meeting RF regulatory standards.
Radio uses Gaussian Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC).
Includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller (ex: Arduino) from sleep when the module receives a transmission providing great power conservation in devices.
Auto-acknowledge and auto-retransmit function.
Specification:
Weight: approx. 13.28 g
Board Size (with pins): approx. 40.7 X 15.5 X 12.2 mm/1.6 X 0.61 X 0.48 in
Antenna Size: approx. 87 X 9.5 mm/3.43 X 0.37 in
Work Range: 1100 m
Included:
1 X Wireless Module
1 X Antenna
-SETIAP PEMBELIAN DIATAS 200 RIBU, GRATIS 1 BUAH CD BERISI BANYAK PROJECT UNTUK PRAKTIKUM LENGKAP DENGAN SOURCODE DAN SKEMATIK NYA.
-DAN MASIH BANYAK LAGI MODUL PRAKTIKUM LAINNYA.
-MODUL PRAKTIKUM AKAN DIKIRIM VIA EMAIL, JIKA MEMESAN SERTAKAN EMAIL.
sangat cocok untuk yang ingin belajar.
Features:
Includes on board support components and the RFX2401C which is the PA (Power Amplifier) and LNA (Low-Noise Amplifier).
A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI).
Configuration registers are accessible through the SPI connection.
Configurable parameters include frequency channel (125 selectable channels) output power and data rate (data rates: 250kbps 1Mbps and 2Mbps).
On chip voltage regulator accepts supply voltages from 1.9 to 3.6V.
V tolerant inputs allows for direct connection of SPI pins to the Arduino.
Internal filtering results in high margins of meeting RF regulatory standards.
Radio uses Gaussian Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC).
Includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller (ex: Arduino) from sleep when the module receives a transmission providing great power conservation in devices.
Auto-acknowledge and auto-retransmit function.
Specification:
Weight: approx. 13.28 g
Board Size (with pins): approx. 40.7 X 15.5 X 12.2 mm/1.6 X 0.61 X 0.48 in
Antenna Size: approx. 87 X 9.5 mm/3.43 X 0.37 in
Work Range: 1100 m
Included:
1 X Wireless Module
1 X Antenna
Ada masalah dengan produk ini?