GM66 USB Serial Barcode Scanner TTL Bar code Reader for Arduino

Barcode dan QR Code Scanner bisa koneksi USB dan Serial/TTL

Bisa scan via tombol atau dengan Serial Command.

Support Arduino,ESP8266,STM32 dll.

1. USB wired barcode scanner to capture 1D, 2D code on labels, paper, mobile phone or computer.

 2. High-efficiency recognization and high upload speed for improving your working efficiency.

3. With buzzer for reminding you that the scanning successfully or not.

 4. Compatible with USB and UART interface.

5. Over 180 configurable options

6. Macro support replace a string in the bar code with another

 7. Programmable preamble postamble and termination

8.Superior reading performance utilizing advanced decoding algorithms

 
Model : GM66
Type : Barcode Scanner
Decoding Ability

1D: EAN- 8,EAN-13,UPC-A,UPC-E,Code 39,Code 93,Code 128,EAN128,Codebar,industrial 2 of 5,Interleave 2 of 5,Matrix 2 of 5,MSI,postal code ect

2D: PDF417,QR Code ,Data Matrix ect

Interface : USB2.0 \ UART
Resolution : 0.10mm (4mil)
Operating Voltage : 5V
Operating Current : 120mA
Weight : 31g
Size : 62.3*42.5*24.5mm

Type of Illuminant : 617nm LED(Aimer), 6500K LEDs(Illumination)

LED Indicator Buzzer and bi-color light: Red-power, Blue-decoding Successfully

Scan Angle : Roll:0-360°, Pitch:±65°or greater, Yaw:±60°or greater

Scanning angle Inclination angle : 34°, Elevation angle 26°

Print Contrast : 30% minimum reflective difference

Reading Distance : 25 - 250mm

Operating Temperature : -20 degrees to 55 degrees

Storage Temperature : -40 degrees to 65 degrees

Temperature Humidity : 5% to 95% Relative humidity, Non-condensing

Light Levels : 0-85000LUX