5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 44
Subtotal
Rp250.000
Mach3 Motion Control Card Board USB CNC 4 Axis 100Khz Flying Carving
Rp250.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: M - 3D Printer dan CNC Sparepart
CNC USB Mach3 100Khz Breakout Board 4 Axis USB Interface Driver Motion Controller
Computer Interface : USB
Software driver : Check CD include
Power Supply : 24V DC (exclude)
CNC Axis : 4 Axis (support 3 Axis)
Description:
1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;
2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
3. Support automatic probe tool
4. Support Emergency input
5. Support for limit switch
6. Support for connecting electronic handwheel
7. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable
8. Have 0-10V output port, you can use mach3 software to control the spindle motor speed.
9. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device
10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device
11. 1 status LED, indicate connection status on the board
Size: 8x7.7cm/3.15x3.03inch
Quantity: 1 Set
Package Contents:
1 x USB CNC Controller Card
1 x USB cable
1 x CD
Computer Interface : USB
Software driver : Check CD include
Power Supply : 24V DC (exclude)
CNC Axis : 4 Axis (support 3 Axis)
Description:
1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;
2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
3. Support automatic probe tool
4. Support Emergency input
5. Support for limit switch
6. Support for connecting electronic handwheel
7. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable
8. Have 0-10V output port, you can use mach3 software to control the spindle motor speed.
9. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device
10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device
11. 1 status LED, indicate connection status on the board
Size: 8x7.7cm/3.15x3.03inch
Quantity: 1 Set
Package Contents:
1 x USB CNC Controller Card
1 x USB cable
1 x CD
Ada masalah dengan produk ini?