OV7670 camera module Supports VGA CIF auto exposure control display

Tutorial :_x000D_

_x000D_

_x000D_
Description_x000D_
The camera module is powered from a single +3.3V power supply. An external oscillator provide the clock source for camera module XCLK pin. With proper configuration to the camera internal registers via I2C bus, then the camera supply pixel clock (PCLK) and camera data back to the host with synchronize signal like HREF and VSYNC. The OV7670 camera module is a low cost 0.3 mega pixel CMOS color camera module, it can output 640x480 VGA resolution image at 30fps. The OV7670 camera module build in onboard LDO regulator only single 3.3V power needed and can be used in Arduino, STM32,Chipkit, ARM, DSP , FPGA and etc._x000D_
_x000D_
Specification_x000D_
Optical size 1/6 inch_x000D_
Resolution 640x480 VGA_x000D_
Onboard regulator, only single 3.3V supply needed_x000D_
Mounted with high quality F1.8 / 6mm lens_x000D_
High sensitivity for low-light operation_x000D_
VarioPixel method for sub-sampling_x000D_
Automatic image control functions including: Automatic_x000D_
Exposure Control (AEC), Automatic Gain Control (AGC), Automatic White Balance (AWB), Automatic_x000D_
Band Filter (ABF), and Automatic Black-Level Calibration (ABLC)_x000D_
Image quality controls including color saturation, hue, gamma, sharpness (edge enhancement), and anti-blooming_x000D_
ISP includes noise reduction and defect correction_x000D_
Supports LED and flash strobe mode_x000D_
Supports scaling_x000D_
Lens shading correction_x000D_
Flicker (50/60 Hz) auto detection_x000D_
Saturation level auto adjust (UV adjust)_x000D_
Edge enhancement level auto adjust_x000D_
De-noise level auto adjust