5.0/ 5.0
100% pembeli merasa puas
12 rating • 2 ulasan
5(12)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 15
Subtotal
Rp180.000
ELRS Mini 2 Receiver EPW5 2.4G ExpressLRS Nano Long Range RX
Rp180.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Board FC BEC ESC PDB VTX RX
Product Introduction :
Efficient acceptance sensitivity in limited space. The SX1280 has the same power at 17mW. Adopt IPEX 1st generation antenna base, with dipole (Mini 1). Sub-T antenna (customized by professional factory, each antenna has been tested by professional instruments to ensure quality and lightweight and durable)
Specifications:
ELRS MINI 2
Type: ISM
ESP8285 processor
2.4GHz Omnidirectional T Antenna
Frequency range: 2400 MHz to 2500 MHz
Receiving refresh rate: 500Hz_upper limit
Receiving refresh rate: 25Hz lower limit
Working voltage: 5v
Weight: 0.42g (without antenna)
Size: 10mm*10mm*3mm Working Agreement: CRSF(Betaflight)
Bind Procedure:
1. After the receiver is connected to the flight controller, power supply to the flight controller by connecting the USB. Insert for the first time After USB, disconnect the USB as soon as you see the LED light on the receiver goes out. repeat the operation once,
When the USB is plugged in for the third time, the LED will start to flash twice, which means the receiver is in pairing mode.
2. Connect the ES24TX module or DIY 2.4G ELRS tuner module to the remote control correctly
After that, copy the ELRS.LUA file to the SD card in the remote control, the directory is SD Card/Scripts/tools, then run ELRS.LUA for Bind operation.
3. After the binding is successful, the LED on the receiver will be always on, and the telemetry signal can also be received.
4. Receiver LED status meaning:
PP receiver: always on, the frequency pairing is successful or the connection and communication are normal, the LED double flashes are in the frequency pairing, the LED double flashes are in the frequency pairing.
Efficient acceptance sensitivity in limited space. The SX1280 has the same power at 17mW. Adopt IPEX 1st generation antenna base, with dipole (Mini 1). Sub-T antenna (customized by professional factory, each antenna has been tested by professional instruments to ensure quality and lightweight and durable)
Specifications:
ELRS MINI 2
Type: ISM
ESP8285 processor
2.4GHz Omnidirectional T Antenna
Frequency range: 2400 MHz to 2500 MHz
Receiving refresh rate: 500Hz_upper limit
Receiving refresh rate: 25Hz lower limit
Working voltage: 5v
Weight: 0.42g (without antenna)
Size: 10mm*10mm*3mm Working Agreement: CRSF(Betaflight)
Bind Procedure:
1. After the receiver is connected to the flight controller, power supply to the flight controller by connecting the USB. Insert for the first time After USB, disconnect the USB as soon as you see the LED light on the receiver goes out. repeat the operation once,
When the USB is plugged in for the third time, the LED will start to flash twice, which means the receiver is in pairing mode.
2. Connect the ES24TX module or DIY 2.4G ELRS tuner module to the remote control correctly
After that, copy the ELRS.LUA file to the SD card in the remote control, the directory is SD Card/Scripts/tools, then run ELRS.LUA for Bind operation.
3. After the binding is successful, the LED on the receiver will be always on, and the telemetry signal can also be received.
4. Receiver LED status meaning:
PP receiver: always on, the frequency pairing is successful or the connection and communication are normal, the LED double flashes are in the frequency pairing, the LED double flashes are in the frequency pairing.
Ada masalah dengan produk ini?