Auto Boost Buck DC Step Up Down Converter LM2577 LM2596 CC CV Adjust
Auto Boost Buck module yang sudah dilengkapi dengan fitur CC CV dan LED Indicator
Spesifikasi:
- Input Voltage : 4-35V - Output voltage: Continuously adjustable(1.25-25V unload adjust) - Chip LM2596 & XL6019 - Output current: 3A Max (If more than 15W, please install the heat sink) - CC range : 0-2A (adjustable) - Revolving light current: CC value * (1%-100%), default is 0.1 times - Minimum voltage difference: 2V - Output power: natural cooling 15W - Conversion efficiency: 80% (the higher the output voltage, the higher the efficiency) - Operating Temperature: Industrial (-40 degree to +85 degree) (ambient temperature more than 40degree, lower power use, or add heat sink)\ - Full load temperature rise: 45 degree - Indicator: CC indicator is Red, charging indicator is Red, charging completed the indicator is Blue. - Output short circuit protection: Yes, constant current. - Connect method: Can solder on the PCB with wire directly - Input: IN+ input Positive is, IN- input negative - Output: OUT+ output is positive, OUT- output negative - Module Size: 50 x 37 x 13mm
Aplikasi: - Driver LED - Charger / Cas semua type battery - Solar Controller, wind generator voltage regulator circuit board power supply, such as automatic buck regulator circuit. - Power supply / regulator peralatan elektronik - Dll
Cara penggunaan: - Pastikan tegangan dan arus di sesuaikan dengan spesifikasi dari battery yang akan di charge atau LED jika sbg driver - Ukur tegangan output dengan multitester putar potensio (CV Adjust) sesuai dengan tegangan yang di inginkan - Untuk arus / current / ampere gunakan ampere meter dengan skala 10A, short pada outputnya dengan ammeter tersebut. lalu putar potensio (CC Adjust) untuk mendapatkan arus yang di inginkan
Paket: 1 buah LM2577 XL6019 Auto Buck Boost Converter