5.0/ 5.0
100% pembeli merasa puas
4 rating • 3 ulasan
5(4)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 3
Subtotal
Rp389.000
BARROWCH NVME M.2 SSD Heatsink Digital OLED Temperature Display Black
Rp389.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: 6 SSD RAM Other Cooler
Product Name: Barrowch Memory Digital Cooling Kit
Product model: FBM2TZ-01
Product material: aluminum alloy
Product weight : 42 gr
Features :
1. Innovative M.2 heat sink for real-time temperature display
2. Can assist the heat dissipation on both sides of the hard disk
3. Applicable to 2280/22110 specification M2 type hard disk
4. Use the supplied screws to install, please do not replace them at will, so as not to damage the hardware.
5. Use silicone gasket to cover the back of the hard disk to avoid short circuit damage to the hardware.
6. Power-on: Just plug the power supply connector into the motherboard fan slot.
7. Display accuracy: display temperature can be accurate to 0.1 degree
8. Instant display: Instant display of temperature, 1ms ultra high temperature sampling rate.
** Precautions:
1. Before the first power-on after installation, please set the speed of the corresponding fan FAN interface in the BIOS of the motherboard to "FULL SPEED" to keep the voltage stable.
2. Set the 12V output to avoid equipment damage or abnormality due to low voltage.
3. The display is fragile, please DO NOT PRESS HARD.
Product model: FBM2TZ-01
Product material: aluminum alloy
Product weight : 42 gr
Features :
1. Innovative M.2 heat sink for real-time temperature display
2. Can assist the heat dissipation on both sides of the hard disk
3. Applicable to 2280/22110 specification M2 type hard disk
4. Use the supplied screws to install, please do not replace them at will, so as not to damage the hardware.
5. Use silicone gasket to cover the back of the hard disk to avoid short circuit damage to the hardware.
6. Power-on: Just plug the power supply connector into the motherboard fan slot.
7. Display accuracy: display temperature can be accurate to 0.1 degree
8. Instant display: Instant display of temperature, 1ms ultra high temperature sampling rate.
** Precautions:
1. Before the first power-on after installation, please set the speed of the corresponding fan FAN interface in the BIOS of the motherboard to "FULL SPEED" to keep the voltage stable.
2. Set the 12V output to avoid equipment damage or abnormality due to low voltage.
3. The display is fragile, please DO NOT PRESS HARD.
Ada masalah dengan produk ini?