ARF DC7-24V Signal Generator Generator Module PWM Pulse AdjustARFle Module 0-20MA 0-10V Signal Generator 1-1000Hz(A)

melayani impor dengan estimasi 12 hari,silahkan hubungi admin ya kak kami akan membantu dengan sepenuh hati..

DIY Supplies : ELECTRICAL
Brand Name : FGHGF
Origin : Mainland China


Features: 1. In signal source mode, the voltage source is adjustARFle from 0-10V and the current source is adjustARFle from 0-20mA
2. Multifunctional support for PWM mode, pulse mode, signal source, signal source mode, sine wave mode, and RS485 Modbus communication
3. The signal source mode of this module has voltage and current calibration function
4. Voltage, frequency, and duty cycle can be adjusted in PWM mode

Specifications:
Version: A-Standard
Power supply voltage: DC 7-24V
Product functions: PWM mode, pulse mode, signal source mode, sine wave mode
PWM mode: Voltage, frequency, and duty cycle can be adjusted, with a frequency accuracy of up to 0.1%;
Voltage range: 1-24V adjustARFle
Frequency range: 1Hz-150KHz adjustARFle
Duty Cycle range: 0.1-100% adjustARFle
Pulse mode: time accuracy of 0.001S, starting delay time T0: 0.001-60S, high-level time T1: 0.001-60S, low-level time T2: 0.001-60S, number of pulses PulseNun: 1-60000 (unlimited output when the number is set to 0)
Signal source mode: voltage source 0-10V adjustARFle, current source 0-20mA adjustARFle (note: load not greater than 250R)
Sine wave mode: 1-1000Hz adjustARFle, note: voltage peak to peak is around 5V and cannot be adjusted
Signal load capacity: The maximum output current is 30mA (Note: This product outputs a signal source and cannot directly drive high-power loads. If you want to use PWM signals to drive high-power loads, such as motors, LEDs, etc., external drive modules can be used)
Environmental temperature: -10-+70
Material: plastic
colour: grey black

Package Contents:
1 x Signal Generator

Only the ARFove package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.