Atur jumlah dan catatan
Stok Total: 99
Subtotal
Rp29.254.000
industrial cooler boxes , walk in cooler r22 pressures
Rp29.254.000
- Kondisi: Baru
- Waktu Preorder: 22 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
industrial cooler boxes , walk in cooler r22 pressures
32653889091
? Pre-Order +/- Sampai Alamat 10-15 Hari
? FREE ONGKIR+PAJAK
?? Garansi uang kembali jika Rusak, Beda Produk
Type : Door & Window Frames
industrial cooler boxes , walk in cooler r22 pressures
PRODUCT
Polyurethane Panels
Our polyurethane panels (locked or unlocked type) are injected with polyurethane 402 kg/m between polyester coated two galvanized steel sheets which have 0.3~0.8mm thickness for optional. The wall and ceiling panel's standard surface is polyester however based on your requirements we can apply Zincalume, stainless steel , aluminum and Galvaniz surface finish. Wall panels are manufactured in such a way in order to avoid thermal bridge.
Cold Room Polyurethane ( PU)
Sandwich
Panels
Thickness
50, 75, 100, 150 , 200 mm
Density
38 - 40 43 46 kg / m3
Width
960mm
Joint
Camlock (tongue and groove)
Plate
Externaliscolorsteelorstainlesssteel or Aluminium (Stucco embossed or pre-painted)
Usage
Wall & Floor & Ceiling
Door
Sliding door and Swing door
Walkinfreezer Sizeandtemperaturecanbemadeaccordingtothecustomers'requirements
0 C ~ + 22C: Communication Station, Mushroom Plant, Medicines Storage,Processing Room, Packing Room
-5 C ~ + 5 C: Pre-Cooling, Keep Fresh,
-10 C ~ -20 C: Freezer Storage
-25 C ~ -30 C: Low Temperature Storage, Quic
k-Freeze
-35 C ~ -50 C: Blast Freezer, Quick-Freezer
DETAILS OF THE PANEL JOINT
Cold room door panels are joined together by means of tongue and groove and locked together by camlock on each side of the panel to ensure air tight joints.
* Cam-lock design fastener to install with the cold room tightly and strongly
* Silica gel are used on the cold room door panel edge of the joint pa
32653889091
? Pre-Order +/- Sampai Alamat 10-15 Hari
? FREE ONGKIR+PAJAK
?? Garansi uang kembali jika Rusak, Beda Produk
Type : Door & Window Frames
industrial cooler boxes , walk in cooler r22 pressures
PRODUCT
Polyurethane Panels
Our polyurethane panels (locked or unlocked type) are injected with polyurethane 402 kg/m between polyester coated two galvanized steel sheets which have 0.3~0.8mm thickness for optional. The wall and ceiling panel's standard surface is polyester however based on your requirements we can apply Zincalume, stainless steel , aluminum and Galvaniz surface finish. Wall panels are manufactured in such a way in order to avoid thermal bridge.
Cold Room Polyurethane ( PU)
Sandwich
Panels
Thickness
50, 75, 100, 150 , 200 mm
Density
38 - 40 43 46 kg / m3
Width
960mm
Joint
Camlock (tongue and groove)
Plate
Externaliscolorsteelorstainlesssteel or Aluminium (Stucco embossed or pre-painted)
Usage
Wall & Floor & Ceiling
Door
Sliding door and Swing door
Walkinfreezer Sizeandtemperaturecanbemadeaccordingtothecustomers'requirements
0 C ~ + 22C: Communication Station, Mushroom Plant, Medicines Storage,Processing Room, Packing Room
-5 C ~ + 5 C: Pre-Cooling, Keep Fresh,
-10 C ~ -20 C: Freezer Storage
-25 C ~ -30 C: Low Temperature Storage, Quic
k-Freeze
-35 C ~ -50 C: Blast Freezer, Quick-Freezer
DETAILS OF THE PANEL JOINT
Cold room door panels are joined together by means of tongue and groove and locked together by camlock on each side of the panel to ensure air tight joints.
* Cam-lock design fastener to install with the cold room tightly and strongly
* Silica gel are used on the cold room door panel edge of the joint pa
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan