Speedybee F405 V4 55A 4In1 Bluetooth Fc Esc Flight Controller Stack

Jangan lupa baca deskripsi dan tanyakan ketersediaan stok.
Untuk pengiriman sameday dan instan harap konfirmasi terlebih dahulu dengan admin kami.

Specifications
Product Name : SpeedyBee F405 V4 30x30 Flight Controller
MCU : STM32F405
IMU(Gyro) : ICM42688P
USB Port Type : Type-C
Barometer : Built-in
OSD Chip : AT7456E chip
BLE Bluetooth : Supported.
WIFI : Not supported
DJI Air Unit Connection Way : Two ways supported: 6-pin connector or direct soldering.
6-pin DJI Air Unit Plug : Supported.
Current Sensor Input : Supported.
Power Input : 3S - 6S Lipo(Through G, BAT pins/pads from the 8-pin connector or 8-pads on the bottom side)
3.3V Output : Supported.
4.5V Output : Supported.
ESC Signal :M1 - M4 on bottom side and M5-M8 on front side.
UART : 6 sets(UART1, UART2, UART3, UART4(Dedicated for Bluetooth connection)), UART5(Dedicated for ESC telemetry),UART6
ESC Telemetry : UART R5(UART5)
I2C : Supported
Traditional Betaflight LED Pad : Supported
RSSI Input : Supported. Named as RS on the front side.
Smart Port / F.Port : Not supported
Supported Flight Controller Firmware : BetaFlight(Default), INAV
Firmware Target Name : SPEEDYBEEF405V4

Product Name : SpeedyBee BLS 55A 30x30 4-in-1 ESC
Firmware : BLHeli_S J-H-40
Continuous Current : 55A * 4
Burst Current : 70(10 seconds)
TVS Protective diode : Yes
ESC Protocol : DSHOT300/600
Power Input : 3-6S LiPo
Power Output : VBAT
Current Sensor : Support (Scale=400 Offset=0)
ESC Telemetry : Not supported
Mounting : 30.5 x 30.5mm( 4mm hole diameter)
Dimension : 45.6(L) * 44(W) *8mm(H)
Weight : 23.5g

komplain harap menyertakan vidio unboxing
Pemesanan sebelum jam 1 dikirim di hari yang sama
Terimakasih