Atur jumlah dan catatan
Stok Total: 100
Subtotal
Rp670.500
3D Printer Magnetic base Print Bed Tape 214/220/235/310mm Heatbed Stickers Flex Plate For Ender3/Ender3 Pro/CR10
Rp670.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
3D Printer Magnetic base Print Bed Tape 214/220/235/310mm Heatbed Stickers Flex Plate For Ender3/Ender3 Pro/CR10
ā³ Pre-Order +/- Sampai Alamat 15-20 Harian
Item Type : Heat Paper
Brand Name : ELVES
Origin : Mainland China
Product details:
Size:235*235mm/310*310mm.
Note: In order to facilitate the operation, our top surface is about 2mm larger than the bottom surface. The actual size of the bottom surface shall prevail.thanks.
PLA: hot bed temperature 50~80 degree.
Feature:
1. The product is divided into two sides of the A.B board.A side:High temperature print layer B side:Low temperature adhesive layer
.
2. Separate bending to take the model. It is more convenient.
3. No need use the beautiful paper and scrapers to assist remove the printed model from the platform.
4. Can be installed on hot bed and glass platform.
5. Printing does not warp. No glue is needed.
6. Can be printed on a cold bed.
7. The A plate is flexible and magnetic, easy to move away from the build platform, take away the print model
8. PC material is flame retardant and wear resistant. Oxidation resistance, low mold shrinkage, good dimensional stability
9. A and B board is flat.It can better reduce printing errors and make the printed model more standard.
Note:
1.These ranges of temperatures are indicative only, you'll have to test and see what works best for your filament.
2.A:High temperature print layer B:Low temperature adhesive layer
3.Please level the build plate well before printing.
4.Please do not let heated nozzle touch the A plate directly !
5.Due to the magnetic pole factor, the magnetic poles are directional when the two stickers are attracted.If the suction is unstable, please rotate side A b
ā³ Pre-Order +/- Sampai Alamat 15-20 Harian
Item Type : Heat Paper
Brand Name : ELVES
Origin : Mainland China
Product details:
Size:235*235mm/310*310mm.
Note: In order to facilitate the operation, our top surface is about 2mm larger than the bottom surface. The actual size of the bottom surface shall prevail.thanks.
PLA: hot bed temperature 50~80 degree.
Feature:
1. The product is divided into two sides of the A.B board.A side:High temperature print layer B side:Low temperature adhesive layer
.
2. Separate bending to take the model. It is more convenient.
3. No need use the beautiful paper and scrapers to assist remove the printed model from the platform.
4. Can be installed on hot bed and glass platform.
5. Printing does not warp. No glue is needed.
6. Can be printed on a cold bed.
7. The A plate is flexible and magnetic, easy to move away from the build platform, take away the print model
8. PC material is flame retardant and wear resistant. Oxidation resistance, low mold shrinkage, good dimensional stability
9. A and B board is flat.It can better reduce printing errors and make the printed model more standard.
Note:
1.These ranges of temperatures are indicative only, you'll have to test and see what works best for your filament.
2.A:High temperature print layer B:Low temperature adhesive layer
3.Please level the build plate well before printing.
4.Please do not let heated nozzle touch the A plate directly !
5.Due to the magnetic pole factor, the magnetic poles are directional when the two stickers are attracted.If the suction is unstable, please rotate side A b
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan