Atur jumlah dan catatan
Stok Total: 100
Subtotal
Rp680.100
3D Printer Magnetic Builadplate Tape 310x310mm Heatbed Sticker Build Surface Flex Plate Ender-3 Series CR-10 Sidewinder X1/X2
Rp680.100
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
3D Printer Magnetic Builadplate Tape 310x310mm Heatbed Sticker Build Surface Flex Plate Ender-3 Series CR-10 Sidewinder X1/X2
ā³ Pre-Order +/- Sampai Alamat 15-20 Harian
Item Type : Heat Paper
Brand Name : ARTILLERY
Origin : Mainland China
Product description:
1.The product is divided into two sides of the A.B board. A side:High temperature print layer B side:Low temperature adhesive layer
2.Separate bending to take the model. It is more convenient.
3.No need for beautiful paper and scrapers to assist the model.
4.Can be installed on hot bed and glass platform.
5.Printing does not warp. No glue is needed.
6.Can be printed on a cold bed.
7.The A plate is flexible and magnetic, easy to move away from the build platform, take away the print model
8.PC material is flame retardant and wear resistant. Oxidation resistance, low mold shrinkage, good dimensional stability
Note:
1. Before sticking the b surface, be sure to wipe the surface of the hot-bed platform clean, otherwise air bubbles will be easily generated during use! !! 2. In order to effectively reach a good non-warped state, it is recommended that the temperature of the hot bed should not exceed 80 degrees. 3 Before printing, please keep the platform leveling nozzle and the platform within 0.05mm, about one sheet of paper is the best thickness. After printing, please remove the model in time. If the cooling time is too long, the model's platform adsorption will be larger. 4.Please do not let heated nozzle touch the A plate directly ! 5.Due to the magnetic pole factor, the magnetic poles are directional when the two stickers are attracted.If the suction is unstable, please rotate side A by 90 degrees.
Installation method:
Due to the magnetic pol
ā³ Pre-Order +/- Sampai Alamat 15-20 Harian
Item Type : Heat Paper
Brand Name : ARTILLERY
Origin : Mainland China
Product description:
1.The product is divided into two sides of the A.B board. A side:High temperature print layer B side:Low temperature adhesive layer
2.Separate bending to take the model. It is more convenient.
3.No need for beautiful paper and scrapers to assist the model.
4.Can be installed on hot bed and glass platform.
5.Printing does not warp. No glue is needed.
6.Can be printed on a cold bed.
7.The A plate is flexible and magnetic, easy to move away from the build platform, take away the print model
8.PC material is flame retardant and wear resistant. Oxidation resistance, low mold shrinkage, good dimensional stability
Note:
1. Before sticking the b surface, be sure to wipe the surface of the hot-bed platform clean, otherwise air bubbles will be easily generated during use! !! 2. In order to effectively reach a good non-warped state, it is recommended that the temperature of the hot bed should not exceed 80 degrees. 3 Before printing, please keep the platform leveling nozzle and the platform within 0.05mm, about one sheet of paper is the best thickness. After printing, please remove the model in time. If the cooling time is too long, the model's platform adsorption will be larger. 4.Please do not let heated nozzle touch the A plate directly ! 5.Due to the magnetic pole factor, the magnetic poles are directional when the two stickers are attracted.If the suction is unstable, please rotate side A by 90 degrees.
Installation method:
Due to the magnetic pol
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan