4.8/ 5.0
92% pembeli merasa puas
14 rating • 6 ulasan
5(13)92.86%
4(0)0%
3(0)0%
2(1)7.14%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 2
Subtotal
Rp48.700
HC-12 SI4463 wireless microcontroller serial, 433 long-range 1000M
Rp48.700
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: ----------MODULE ETHERNET , GSM , BLUETOOTH , WIFI , SMS , GPRS
HC-12 SI4463 wireless microcontroller serial, 433 long-range, 1000M with antenna for Bluetooth
PS: HC-11 can not be connected to communicate with the HC-12, they work independently, in pairs.
1: Supply voltage 3.2V ~ 5.5V. (If you want to work in the module launch state for a long time, it is recommended when the supply voltage exceeds 4.5V series with a 1N4007 diode, to avoid heating module built LDO)
2: Default communication distance (open test): about 600m (adjustable to achieve the maximum communication distance of 1000m, the air baud rate 5000bps).
3: The default idle current: 16MA (modules in different operating current of the different operating modes).
4: Module Size: 27.8mm 14.4mm 4mm.
5: Operating frequency range (433.4-473.0MHz, up to 100 communication channels) Maximum 100mW transmit power (can be set)
6: The module supports software upgrades. (We provide customers with software upgrades)
7: The default factory settings: operating mode FU3, baud rate 9600bps, communication channel CH001 (433.4M).
PS: HC-11 can not be connected to communicate with the HC-12, they work independently, in pairs.
1: Supply voltage 3.2V ~ 5.5V. (If you want to work in the module launch state for a long time, it is recommended when the supply voltage exceeds 4.5V series with a 1N4007 diode, to avoid heating module built LDO)
2: Default communication distance (open test): about 600m (adjustable to achieve the maximum communication distance of 1000m, the air baud rate 5000bps).
3: The default idle current: 16MA (modules in different operating current of the different operating modes).
4: Module Size: 27.8mm 14.4mm 4mm.
5: Operating frequency range (433.4-473.0MHz, up to 100 communication channels) Maximum 100mW transmit power (can be set)
6: The module supports software upgrades. (We provide customers with software upgrades)
7: The default factory settings: operating mode FU3, baud rate 9600bps, communication channel CH001 (433.4M).
Ada masalah dengan produk ini?