4.9/ 5.0
97% pembeli merasa puas
45 rating • 9 ulasan
5(43)95.56%
4(1)2.22%
3(1)2.22%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 14
Subtotal
Rp82.500
Hot bed MK2B Heat bed heatbed 214x214 12v / 24v heated 3D Printer
Rp82.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
FR-4.
hot bed size: 214mm * 214mm * 1.6mm
hot beds heated area size: 200 * 200mm.
color: red
power supply: 12V or 24V.
Resistance: 1.0~1.2 ohm (12V) - 3-3.4 ohm(24V)
power is about 120W.
Printing
Previously the accepted method was to cover the PCB heatbed with kapton tape, degrease it and print. An alternative method that has become popular is to use a sheet of 3mm borosilicate glass, held using bulldog clips (see the Discussion tab). Adherence of the printed object to the glass is helped by spraying the clean glass with hair lacquer (the "extra strength" type).
ABS temperature range: 100-110°C
PLA temperature range: 50-70°C
These ranges of temperatures are indicative only, you'll have to test and see what works best for your printer/filament/hotend setup.
MAKE SURE YOUR Power Supply HAS 10 MORE AMPS SPARE!!!
hot bed size: 214mm * 214mm * 1.6mm
hot beds heated area size: 200 * 200mm.
color: red
power supply: 12V or 24V.
Resistance: 1.0~1.2 ohm (12V) - 3-3.4 ohm(24V)
power is about 120W.
Printing
Previously the accepted method was to cover the PCB heatbed with kapton tape, degrease it and print. An alternative method that has become popular is to use a sheet of 3mm borosilicate glass, held using bulldog clips (see the Discussion tab). Adherence of the printed object to the glass is helped by spraying the clean glass with hair lacquer (the "extra strength" type).
ABS temperature range: 100-110°C
PLA temperature range: 50-70°C
These ranges of temperatures are indicative only, you'll have to test and see what works best for your printer/filament/hotend setup.
MAKE SURE YOUR Power Supply HAS 10 MORE AMPS SPARE!!!
Ada masalah dengan produk ini?