Atur jumlah dan catatan
Stok Total: 111
Subtotal
Rp586.000
OpenPilot OPLINK MINI CC3D REVO Universal Transceiver TX RX Store 10B
Rp586.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
OpenPilot OPLINK MINI CC3D REVO Universal Transceiver TX RX Store 10B
Kami Menyediakan Berbagai Macam Barang yang Anda Butuhkan
- Item Pre-Order (6 - 10 Hari).
- Semua Produk Berkualitas.
- Pengiriman Cepat (Tergantung Alamat Pengiriman).
- Hubungi Kami Untuk Menanyakan Ketersediaan Barang.
Happy Shopping !
OpenPilot OPLINK MINI CC3D REVO Universal Transceiver TX RX Module Integrating Remote Controller
The OPLink is a radio transceiver backed by an ARM32 powered digital packet processor specifically designed for the OpenPilot project, it was originally developed under the codename: PipXtreme and there are many artifacts that still reflect this.
It is a two-way radio system allowing real time telemetry information for the Ground Control Station, Wireless Configuration and even radio control from your transmitter over a single communications link.
You will need two OPLink radios to establish a connection between the vehicle and ground station. Note that the Revolution board has an OPLink built into the flight controller.
The same firmware version must be running in Revo and OPLM devices (i.e. if you upgrade one board, you will need to upgrade all others that are
bound
together).
First time use with OPLM
When you first try to use your OPLM with the GCS, it will not be automatically picked up by the GCS.
You first need to go into the
Firmware
tab and click
Upgrade
Erase
while the OPLink is disconnected.
Then plug in OPLink when the upgrade process asks for it. Once this has been done, your OPLM board will show up at the bottom of your GCS as a connected device.
The configuration page icon at the bottom of the page icon list may be hidden without scrolling
S10BT-1000081
Kami Menyediakan Berbagai Macam Barang yang Anda Butuhkan
- Item Pre-Order (6 - 10 Hari).
- Semua Produk Berkualitas.
- Pengiriman Cepat (Tergantung Alamat Pengiriman).
- Hubungi Kami Untuk Menanyakan Ketersediaan Barang.
Happy Shopping !
OpenPilot OPLINK MINI CC3D REVO Universal Transceiver TX RX Module Integrating Remote Controller
The OPLink is a radio transceiver backed by an ARM32 powered digital packet processor specifically designed for the OpenPilot project, it was originally developed under the codename: PipXtreme and there are many artifacts that still reflect this.
It is a two-way radio system allowing real time telemetry information for the Ground Control Station, Wireless Configuration and even radio control from your transmitter over a single communications link.
You will need two OPLink radios to establish a connection between the vehicle and ground station. Note that the Revolution board has an OPLink built into the flight controller.
The same firmware version must be running in Revo and OPLM devices (i.e. if you upgrade one board, you will need to upgrade all others that are
bound
together).
First time use with OPLM
When you first try to use your OPLM with the GCS, it will not be automatically picked up by the GCS.
You first need to go into the
Firmware
tab and click
Upgrade
Erase
while the OPLink is disconnected.
Then plug in OPLink when the upgrade process asks for it. Once this has been done, your OPLM board will show up at the bottom of your GCS as a connected device.
The configuration page icon at the bottom of the page icon list may be hidden without scrolling
S10BT-1000081
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan