JSG G2 DUAL OUTPUT CONTROLLER NO CA PN 13-002500-1

JSG G2 DUAL OUTPUT CONTROLLER NO CA PN 13-002500-1

JSG G2 Lubrication Controller

The economical model G2 Pulse Lubrication Controller is
suitable for Single Line Parallel injector lubrication systems.
The G2 Controller has 2 outputs, one output specially
designed to control motors that require a pulse signal to
reciprocate, while the other output is used to keep the vent
valve open during a lubrication cycle.

Benefits

Can fit almost anywhere. The compact proportions and weight of he G2 allows it to fit into most new and existing setups with minimal impact
Simple Programming via the fascia controls results in almost effortless commissioning. No pin jumpers or dipswitches means the housing can stay shut
Clear indication of status or faults through labelled LED indicators
Powerful monitoring capability through feedback sensors for lubrication cycle and reservoir low level monitoring
Avoid tampering with special programming access
Features

Pause time: 1 second to 50 hours
Max run time/over pressure monitor: 1 second to 50 minutes
Pump run pressure timeout range: 1 to 50 minutes
Solenoid valve cycle time: 1 to 50 seconds
External fault lamp output
Low level indicator light
Test mode allows the user to verify an installation and diagnose faults
Non-volatile memory
Simple connection with pre-made looms available
Built in fuse
Manual override button
Monitors pressure cycles via timeout alarm
Includes mounting bracket