Laser Sensor Laser Galvanometer 10K/15K For Animated Laser Light /

Selamat Datang di Toko Kami. - Kami Menjual Produk-produk Import - Produk Dikirim dari Luar Negeri. - Estimasi Kiriman 5-15 Hari. Mohon Menunggu Model Number : galvanometer Certification : CE Power supply requirements +15V 1A , -15V 1A X Y galvanometer motor, L-shaped galvanometer bracket, integrated galvanometer drive Features: This product requires only one light source to work easily and simply. Calibrated mirrors calibrated according to the 15K standard The actual speed is around 10K Can play general animations, can #39;t play videos Galvo Mirror Referecne. Power supply voltage: 15V Analog signal input impedance: 200K 1 (single-ended input) Position output impedance: 1K 1% Position input scale factor: 0.5 V/ Analog position input range: 5 V Position compensation range: 2V Position output scale factor: 0.5 V/ Deviation output scale factor: 0.5 V/ Electronic temperature stability: 40PPM/C Peak current: 2A Average current: 0.5A (related to power supply, load and heat dissipation) Ideal imaging position (planar) Working temperature: 0~40C Size: 81.5mm40.5mm28mm Maximum scanning angle (mechanical angle): 30 optical angle (factory setting 20) Rotor inertia: 0.025 gm*cm2, 10% Application 1. Laser test tools 2. Concentricity positioning 3. Medical equipment positioning 4. Production of signal equipment Notice: 1. Before work, you must fix the drive board and motor seat on a large area of metal plates. At the same time, pay attention to maintaining good air convection to heat dissipation. 2. The scanning system is equipped with various connection cables. If the user is connected by other cables, please pay attention to the reference drive board wiring diagram. The serial number of the motor must be consistent with the scanning board serial number.The X, Y drive board and the motor correspond to each other, otherwise the pattern is asymmetric, such as circular ellipse. 3. The scanning board has been adjusted well when it is out of the