5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 4
Subtotal
Rp31.350.000
Dynaudio Emit 30 Floorstanding Speaker passive speaker new model
Rp31.350.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Floorstanding Speaker
BARANG TERJAMIN 100% ORIGINAL!
GARANSI RESMI!!
Sebelum pesan bertanya dahulu ke kami untuk ketersediaan stock!
The cones are moulded in one piece; we don’t use a separate glued dust-cap. The little balance ribs around the edge of the centre are bonded directly to the voice-coil behind it, making the whole motor assembly one solid piece. Using fewer moving parts gives our engineers fine control over how the speaker moves – which, in turn, means fine control over how it performs. You’ll hear it as strong, tight bass and startlingly clear vocals, guitars and more. Even at eyebrow-raising volume.
While the twin 14cm mid/bass units deal with the… well, midrange and bass… the upper frequencies are handled by the tweeter. Emit might be an ‘entry-level’ speaker, but we certainly haven’t used any old unit off the shelf; witness the incredible Cerotar tweeter (the same as we use in Evoke). It’s based on the Esotar Forty anniversary tweeter and the Esotar Pro found in our Core studio reference speakers, and must be heard to be believed.
Sensitivity: 87dB (2.83V/1m)
IEC power handling: 180 watt
Impedance: 4 Ω
Frequency response (± 3 dB):44Hz - 25kHz (-6 dB 39 Hz - 35 Khz)
Box principle: 2 X Bass reflex rear double flared port
Crossover: 2.5-way
Crossover frequency: 1000/3550Hz
Crossover topology: 1ST order tweeter / 2nd order woofer
Midrange / Woofer:14 cm MSP
Woofer:14 cm MSP
Tweeter:Cerotar soft dome with Hexis
Dimensions (W x H x D): 170 X 900 X 271,5 mm
6.7 X 35.4 X 10.7 in
Dimensions with feet/grille (W x H x D): 267,5 X 946,5 X 335,4 mm
10.5 X 37.3 X 13.2 in
GARANSI RESMI!!
Sebelum pesan bertanya dahulu ke kami untuk ketersediaan stock!
The cones are moulded in one piece; we don’t use a separate glued dust-cap. The little balance ribs around the edge of the centre are bonded directly to the voice-coil behind it, making the whole motor assembly one solid piece. Using fewer moving parts gives our engineers fine control over how the speaker moves – which, in turn, means fine control over how it performs. You’ll hear it as strong, tight bass and startlingly clear vocals, guitars and more. Even at eyebrow-raising volume.
While the twin 14cm mid/bass units deal with the… well, midrange and bass… the upper frequencies are handled by the tweeter. Emit might be an ‘entry-level’ speaker, but we certainly haven’t used any old unit off the shelf; witness the incredible Cerotar tweeter (the same as we use in Evoke). It’s based on the Esotar Forty anniversary tweeter and the Esotar Pro found in our Core studio reference speakers, and must be heard to be believed.
Sensitivity: 87dB (2.83V/1m)
IEC power handling: 180 watt
Impedance: 4 Ω
Frequency response (± 3 dB):44Hz - 25kHz (-6 dB 39 Hz - 35 Khz)
Box principle: 2 X Bass reflex rear double flared port
Crossover: 2.5-way
Crossover frequency: 1000/3550Hz
Crossover topology: 1ST order tweeter / 2nd order woofer
Midrange / Woofer:14 cm MSP
Woofer:14 cm MSP
Tweeter:Cerotar soft dome with Hexis
Dimensions (W x H x D): 170 X 900 X 271,5 mm
6.7 X 35.4 X 10.7 in
Dimensions with feet/grille (W x H x D): 267,5 X 946,5 X 335,4 mm
10.5 X 37.3 X 13.2 in
Ada masalah dengan produk ini?