Power Output per Channel 100 Watts into 8 Ohms 160 Watts into 4 Ohms Number of Channels:2 Speaker Impedance:4 or 8 Ohms Rated Power Band 20Hz to 20kHz Dynamic Headroom 1.8dB Frequency Response +0,-0.5dB 20Hz to 20kHz Frequency Response, +0, -3dB 10Hz to 100kHz Sensitivity Phono (Moving Coil) N/A Sensitivity Phono (Moving Magnet) 3.0mV Sensitivity High Level (Balanced / Unbalanced) 0.6V/0.3V Sensitivity (Power Amp input) N/A Signal To Noise Ratio (Moving Coil) N/A Signal To Noise Ratio (Moving Magnet) 80dB Signal To Noise Ratio (High Level) 97dB Signal To Noise Ratio (Power Amp input) N/A Input Impedance (Balanced / Unbalanced) 20K/20K Damping Factor 8 Ohms: >200 4 Ohms: >100 Maximum Output (Balanced / Unbalanced) 8V Unbalanced CONNECTIVITY Balanced Input 1 Unbalanced Input 2 Phono Input Moving Coil 0 Phono Input Moving Magnet 1 (fixed loading) Upgradeable Digital Audio Module No Digital Coaxial Input 0 Digital Optical Input 0 Digital MCT (DIN) Input 0 Digital USB Input 0 Balanced Variable Output 0 Unbalanced Fixed Output 0 Unbalanced Variable Output 0 Headphone Output 1/4" High Drive Subwoofer Output 1 (mono) AM/FM Tuner option No Home Theater PassThru No Unbalanced Analog Connector Type Standard Speaker Binding Post Type Standard Service Port 0 DIGITAL AUDIO SPECIFICATIONS Digital-to-Analog Converter (DAC) Type N/A Digital Coaxial Input Sample Rate N/A Digital Optical Input Sample Rate N/A Digital MCT (DIN) Input Sample Rate N/A Digital USB Input Sample Rate N/A CONTROL Tone Controls Bass and Treble Tone Bypass and Input Assign Yes RS232 Control Input No Power Control Output 1 Rear Panel Data Port 1 Rear Panel IR Sensor Input No Input Level Match Yes GENERAL SPECIFICATIONS Vacuum Tube or Solid State Preamplifier: Vacuum Tube Power Amplifier: Solid State Dual Layer Chassis Yes McIntosh Monogrammed Heatsinks' Yes Power Requirement 120V 50/60Hz, 3.7A Standby Power Requirement 0 .5 Watts Dimensions (W x H x D) 12" (30.5cm) x 7-5/8" (19.4cm) x 18" (45.7cm)