PRE-ORDER DC 5V Pressure Transmitter Arduino 0.2 0.5 0.8 1.6 1.0 MPa

PRE-ORDER pressure sensor G1/4 DC 5V Pressure Transmitters 0.2Mpa 0.5Mpa 0.8Mpa 1Mpa 1.6Mpa Note: Tuliskan Range ukur yang akan di Order pada Keterangan Semua Pembelian Barang Pre-Order tidak bisa dibatalkan dan langsung kami Proses, silahkan chat sebelum Order. Lamanya Pre-Order kurang lebih 3 minggu. Specifications: Power Supply: 5VDC Output Voltage: 0.5-4.5 VDC Thread Connection: G 1/4 Sensor material: Carbon steel alloy Working Current: #39;10 mA Working Pressure Range: as per Range Order Maximum Pressure: 150% of Full Scale Range Cable length: 19cm Destroy Pressure Limit: 150% Of Full Scale Range Working TEMP. Range: 0-85 degrees Temperature Range: 0-100 degrees C Measuring Error: 1.5 % FSO Temperature Range Error: 3.5 %FSO Response Time: #39;2.0 ms Application: non-corrosive gas liquid measurement Wiring: red +, black -, yellow output Package includes: 1x Pressure Transducer Sensor sesuai range yg diorder Note: Typical Application: Non-corrosive Liquid pressure survey Untuk Sensor Pintu Magnetic Door MC-38 yang bibiasa digunakan Arduino: https://www.tokopedia.com/automa88/sensor-pintu-magnet-mc38-mc-38-magnetic-door-switch-nc-normally-close Untuk Sensor Temperature 3950 NTC 10K biasa digunakan Arduino dan Controller MH1210W / KT1210W: https://www.tokopedia.com/automa88/3950-10k-ntc-sensor-suhu-1m-thermistor-temperature-probe-waterproof Untuk Sensor Thermocouple type K yang biasa digunakan untuk Arduino yang ekonomis: https://www.tokopedia.com/automa88/thermocouple-k-type-temperature-sensor-suhu-drat-m6-thread-temperatur Untuk Temperature Sensor RTD PT-100 https://www.tokopedia.com/automa88/rtd-pt-100-pt100-probe-temperature-thermal-sensor-suhu-3-wire Untuk Manometer Pressure Calibrator Low Range: https://www.tokopedia.com/automa88/digital-differential-pressure-gauge-vacuum-manometer-calibrator-gm-510-1 Untuk Pressure Gauge: https://www.tokopedia.com/automa88/pressure-gauge-3-inch-1-2-inch-npt-male?m_id=862434