Pressure Transducer Transmitter Sensor 0-60Bar DC 5V 60 Bar 0.5-4.5V

*** READY STOCK, SILAHKAN DI ORDER ***
*** PRESSURE SENSOR TRANSDUCER UNTUK ARDUINO 0-60 Bar (6 MPa), Drat G 1/4, Power supply 5 VDC ***

Specifications:
Power Supply: 5VDC
Output Voltage: 0.5-4.5 VDC
Thread Connection: G 1/4
Sensor material: Stainless steel alloy
Working Current: 10 mA
Working Pressure Range: 0-60 Bar / 6 MPa
Maximum Pressure: 7.2 MPa
Cable length: 19cm
Destroy Pressure: 9.0 MPa
Working TEMP. Range: 0-85 degrees
Storage Temperature Range: 0-100 degrees
Measuring Error: 0.5 % of FS
Response Time: 2.0 ms
Application: water, air compressor, or all media non-corrosive gas orliquid

Wiring:
red +,
black -,
yellow output

Package includes:
1x Pressure Transducer Sensor 0-60 Bar, DC 5V, Output 0.5-4.5V, Drat G 1/4 BSP
Typical Application: Non-corrosive Liquid pressure survey

Untuk Sensor Pintu Magnetic Door MC-38 yang bibiasa digunakan Arduino:
https://www.tokopedia.com/automa88/sensor-pintu-magnet-mc38-mc-38-magnetic-door-switch-nc-normally-close

Untuk Sensor Temperature 3950 NTC 10K biasa digunakan Arduino dan ControllerMH1210W / KT1210W:
https://www.tokopedia.com/automa88/3950-10k-ntc-sensor-suhu-1m-thermistor-temperature-probe-waterproof

Untuk Sensor Thermocouple type K yang biasa digunakan untuk Arduino yang ekonomis:
https://www.tokopedia.com/automa88/thermocouple-k-type-temperature-sensor-suhu-drat-m6-thread-temperatur

Untuk Temperature Sensor RTD PT-100
https://www.tokopedia.com/automa88/rtd-pt-100-pt100-probe-temperature-thermal-sensor-suhu-3-wire

Untuk Manometer Pressure Calibrator Low Range:
https://www.tokopedia.com/automa88/digital-differential-pressure-gauge-vacuum-manometer-calibrator-gm-510-1

Untuk Pressure Gauge:
https://www.tokopedia.com/automa88/pressure-gauge-3-inch-1-2-inch-npt-male?m_id=8624340