PARKER 731-24 (1 1/2") Parkrimp no-skive hose ~ High Pressure 29.0MPa

PARKER Parkrim no-skive hose ~ High Pressure
Part no. 731-24 (1 1/2 inch)
Max working 29.0 MPa 4200psi
Min brust pressure 116 MPa 16800psi
Min bend radius 560mm
I.D 38.1mm O.D 53mm
DN 38

731 No-Skive
Multispiral Exceeds ISO 3862 Type 4SH - EN 856 Type 4SH
• No-Skive hose construction
• Reinforcement of four spiral high-tensile steel wire
✓ Primary Applications
General high pressure hydraulic applications
✓ Applicable Specifications
Exceed ISO 3862 Type 4SH - EN 856 Type 4SH

✓ Construction
Inner tube: Synthetic rubber
Reinforcement: Four spiral high-tensile steel wire
Cover: Synthetic rubber

✓Recommended Fluids
Hydraulic fluids on a mineral-oil basis, water-glycol and lubricating oils, air and water. For air and gas applications with a pressure exceeding 1.7 MPa, the cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-26 to Ab-34 for more detailed information.

✓ Temperature Range
-40 °C up to +100 °C
✓ Exception:
Air max. +70°C
Water.......... max. +85 °C