DSP Zevox ZD 8.4 PRO-DSD Hi-Res

Processor Zevox ZD 8.4 PRO DSD SPECIFICATIONS : • Active Range : ≥110dB • S/N Ratio : ≥100dB • T.H.D. : ≤0.01% • Freq. Response : 20Hz~20KHz • Input Impedance : Low level input : 20KΩ High level input : 240Ω • Low Level output : 100Ω • Power output (4Ω) : RMS 25W X4, Peak Power 50WX4 • Signal input/output range : RCA Input: 8Vpp; High level 26Vpp; RCA Output: 14Vpp • Temperature : -20~70°C • Supply Voltage : DC 12V~14.4V • Turn-on REM output : +12 V starting voltage output(0.2A) • Power consumption : ≤0.1W • Crossover : 6dB/Octave - 48 dB/Octave, Linkwitz Riley, Butterworth amp; Bessel • Time Delay : 0.000 - 50.00 ms, 0.00 - 1700.0 cm, 0.00 - 669 inch • Polarity : 0°/180° • Phase Adjustment/Shifter : 0°~360° • AD Chip : AKM 5704 • DA Chip : AKM 4438 • DSP Chip : ADI 1452 • Bluetooth Audio Player • Android amp; iOS Audio Player App • Android amp; iOS App for DSP Setup amp; Tuning • Remote Control Included • External Bluetooth BT 5.0 Included Bluetooth 5.0, redefining HD wireless audio with LDAC Use CSR8675 chipset to support Bluetooth 5.0 and LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol. Could achieve 24bit 96KHz HD transmission with LDAC, the Bluetooth could have good sound performance from right on. Remote Controller : Controller features - Controller can be used for DSP settings Directly, Crossover, Equalizer, Mixer, Steering Wheel remote pairing, Sound Source, etc. Save and recall function from controller. Features : » 3 USB Port and 1 Micro SD up to 5 TB (total 20TB) for Audio Player DSD 1024, PCM 32 bit/768 kHz, FLAC, WAV and all type of audio files, USB system FAT32, NTFS and exFAT. » 4 Channel Input amp; 8 Output » Optical amp; Coaxial Input - Optical amp; Coaxial Output » Steering Wheel remote : can pairing to original steer with Can Bus.