Modul Smartgen HGM180HC HGM180 180 HC Controller Kunci Kontak Genset

HGM180HC auto start module is an engine control module designed to control
the engine via pushbuttons on the front panel or remote start signal. The module
has 3 working modes to choose. When detecting faults, such as low oil pressure,
high water/cylinder temperature, auxiliary alarm, over speed, it will disconnect
fuel relay and energize to stop. LED annunciator displays the faults, which can
offer real and effective alarm information.

Working Voltage DC8.0V to 35.0V continuous
Power Consumption
Standby (12V: 0.12W, 24V: 0.24W)
Working (12V: 0.5W, 24V: 1W)
Alternator Voltage Input 15VAC - 360VAC (ph-N)
Alternator Rated Freq. 50/60Hz
Over Speed Freq. 114% of rated freq.
Condition of Crank
Disconnect
Generator voltage ≥15VAC and frequency ≥15Hz
Charge Failure Voltage 4 Digital Inputs Connect to B- active
Start Output 1Amp DC28V relay output B+
HGM180HC AUTO START MODULE
HGM180HC Control Module ISSUE 2011-12-22 Version 2.7 Page 5 of 10
Items Contents
Preheat Output 1Amp DC28V relay output B+
Fuel Output 1Amp DC28V relay output B+
Stop Output 1Amp DC28V relay output B+
Programmable Output 1Amp DC28V relay output B+
Hours Counter Max 99999.9 hours
Case Dimensions 84mm x72mm x 35mm
Panel Cutout 78mm x 66mm
Working Condition Temperature: (-30~+70)ºC Humidity: (20~90)%
Storage Condition Temperature: (-40~+80)ºC
Protection Level
IP55: when waterproof rubber gasket added
between controller and its panel.
IP42: when waterproof rubber gasket not added
between controller and its panel.
Insulation Intensity
Object: among input/output/power
Quote standard: IEC688-1992
Test way: AC1.5kV/1m 3mA leakage current
Weight 0.2kg