actuator ball valve 220v 1inch DN25 solenoid valve kran elektrik 1"

Decription:
Features:
1.Straight water flow,large flow,no slag
2.Good waterproof and dustproof function
3.Valve cold/hot and ambient cold/heat transfer to the actuator
4.Easy to disassemble/install
5.The actuator can be installed after the equipment and pipeline are installed, which is more conducive to improving the installation efficiency.
6.When the valve is opened and closed, the signal light indicates the working state, and the valve is automatically detected whether the valve is fully open or fully closed.
7.High energy saving, long life design
8.Due to the eccentric structure of the actuator, the valve can be mounted close to the wall
9.Closed pressure difference, close tight
10.The ball valve of the drive can be removed with a common tool switch
11.The actuator can be mounted in both directions for easier wiring and maintenance
12.The valve is flexible to open, which can effectively prevent water hammer
Specification:
Technical Parameters:
Medium: cold/hot water and 60% ethylene glycol
Specifications: DN15, DN20, DN25, DN32
Structure form: two-way or three-way
Power supply voltage: AC220V, AC24V
Power consumption: 6W (only when the valve is opened/closed)
Running time: 5-15 seconds
Nominal pressure: 1.6MPa
Medium temperature: 2-95 degree centigrade
Maximum pressure difference: 1.0MPa
Material
Body: brass forged,stainless steel
Valve ball: stainless steel
Rod: brass
Seat: PTFE
Form: two-way valve, three-way valve
Connection method: pipe thread G
DN15=1/2inch DN20=3/4inch DN25=1inch ND32=1.2 inch
DN40=1.5inch DN50=2inch
Included:
1x Electric Ball Valve