Penguras USB 1A 2A - Tester Drainer Dummy Load Charger Powerbank Current With Switch

Deskripsi Penguras USB 1A 2A

--- Ready stock = Produk bisa langsung dibeli ---

Instructions for use:
- The USB plug is plugged into the 5V output interface. Because of the resistance value and the maximum power limit of the resistor, it cannot be connected to the fast charging interface above 5V
- After power on, the power indicator D1 will light up
- Switch S1 to the ""ON"" gear, D2 lights up, the 4R7 resistor starts to work, and the current is about 1A
- Switch S2 to the ""ON"" gear, D3 lights up, the 2R5 resistor starts to work, and the current is about 2A
- If S1 and S2 are switched to the ""ON"" gear at the same time, the two resistors work and the current is about 3A

Features:
- It's normal when welding resistance may occur heated white smoke or odor phenomenon
- New products can freely be switched with a switch, very convenient and easy to use
- USB load resistance, is mainly to do discharge test, if the charger or mobile power supply output current is 2A, load meter power is 5V * 2A = 10W, if the output current is 1A, then the power load is 5V * 1A = 5W
- Switch and usb interface design

Specifications:
- Temperature: 80-85C
- Resistance: 1A-2A
- Size: 74.1x18.4x9.9mm
- Weight: 15g

Package includes:
- 1pcs x Penguras USB 1A 2A

Grosir:
- 1 kg = 76 pcs
- Harga grosir lebih murah
- Reseller, dropshipper, dan beli banyak welcome :)