Atur jumlah dan catatan
Stok Total: Sisa 8
Subtotal
Rp1.656.880
| TERMURAH! | | JUAL MURAH! | Holybro M10 Pix32 GPS Module for Pix32 or 2.4.6 and 2.4.8
Rp1.656.880
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
SELAMA PRODUK TERPOSTING/TERLIHAT BERARTI READY STOCK !!!
LANGSUNG ORDER, TIDAK PERLU KONFIRMASI LAGI.
=======================================================
The M10 GPS uses multi-constellation GNSS powered by u-blox M10 series, a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently.
It also comes with the IST8310 compass, tricolored LED indicator, buzzer, and a safety switch. There are 3 different connectors options for different purposes. This module ships with a baud rate of 115200 5Hz.
Firmware Support for M10 GPS:
PX4 1.14, ArduPilot 4.3, INAV 5.0.0, Betaflight 4.3.0 or newer is required.
As of Sept 7th 2023, PX4 has released 1.14 RC1 (release candidate). Please check this link for the latest release detail. More details on how to flash RC release can be found here.
Features
Newest Ublox 10th Gen GNSS
High-gain 25*25*4mm antenna
IST8310 Compass
Internal Buzzer, Safety switch
SKU12041 - Holybro M10 GPS for Pix32 & Pixhawk1/2.4.6/2.4.8 (Molex1.25mm 6pin & 4pin &3pin cable):
These connectors are for "Switch", "GPS", and "I2C" input ports on the Pix32/Pixhawk1/Pixhawk 2.4.6/2.4.8
Package Includes:
1x M10 GPS Module
Terimakasih telah membeli dan mempercayai toko kami, dengan senang hati kami melayani
LANGSUNG ORDER, TIDAK PERLU KONFIRMASI LAGI.
=======================================================
The M10 GPS uses multi-constellation GNSS powered by u-blox M10 series, a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently.
It also comes with the IST8310 compass, tricolored LED indicator, buzzer, and a safety switch. There are 3 different connectors options for different purposes. This module ships with a baud rate of 115200 5Hz.
Firmware Support for M10 GPS:
PX4 1.14, ArduPilot 4.3, INAV 5.0.0, Betaflight 4.3.0 or newer is required.
As of Sept 7th 2023, PX4 has released 1.14 RC1 (release candidate). Please check this link for the latest release detail. More details on how to flash RC release can be found here.
Features
Newest Ublox 10th Gen GNSS
High-gain 25*25*4mm antenna
IST8310 Compass
Internal Buzzer, Safety switch
SKU12041 - Holybro M10 GPS for Pix32 & Pixhawk1/2.4.6/2.4.8 (Molex1.25mm 6pin & 4pin &3pin cable):
These connectors are for "Switch", "GPS", and "I2C" input ports on the Pix32/Pixhawk1/Pixhawk 2.4.6/2.4.8
Package Includes:
1x M10 GPS Module
Terimakasih telah membeli dan mempercayai toko kami, dengan senang hati kami melayani
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan