Download Tokopedia App
Tentang TokopediaMulai Berjualan PromoTokopedia Care
tokopedia-logo
Kategori
Atur jumlah dan catatan

Stok Total: 2983

Subtotal

Rp1.474.000

IRX4 Multi Protocol TX Module Tuner 4 In 1 TBS Mambo Frsky D8 D16 OpenTX QX7 X9D ACCESS Flysky DSM2 Radiomaster TX16S Jumper T18

Rp1.474.000
  • Kondisi: Baru
  • Min. Pemesanan: 1 Buah
  • Etalase: Semua Etalase
SELAMAT DATANG DI TOKO KAMI TBS Mambo IRX4 Multi Protocol TX Module Tuner 4 In 1 Frsky D8 D16 OpenTX for Frsky QX7 X9D ACCESS Flysky DSM2 Radiomaster TX16S Jumper T18




Four-in-one multi-protocol tuner STM32 upgraded version






Manual and data download:




Note:




Overview:
This tuner can control multiple four-axis, helicopters and fixed wings of different brands more flexibly and conveniently. Due to the continued use of the remote control you are familiar with, the operation l and flying experience are better.




Working parameters:
Working voltage: 5-14 volts Working current: <=100mA
Working frequency: 2.4G ISM band RF power: +22dBm
Main control chip: STM32F103CBT6 (128K ROM, 20K RAM)
Size: 55x41x7mm, without buttons Net weight: 23g, with antenna




The tuner has two working modes: PPM mode and serial port mode.
In PPM mode, there are 31 different protocols corresponding to the 16 positions of the rotary coding switch (protocol 0 is reserved for serial port mode). Please refer to the list on the previous page of the manual for the correspondence between the two.
When the green light is off, you can use the knob to select protocols No. 1 to 15, and when the green light is on, you can select protocols No. 16 to 31.
If you need to turn on or turn off the green light, please follow the steps below:
Turn off the remote control, point the rotary coding switch to "0", press and hold the black link button on the tuner, then turn on the remote control, release the button after 3 seconds, and then you can see the green light switch between on and off , The optional protocol will be switched at the same time.




In PPM mode, normal use operation:
1. Fix the tuner, install the antenna, and turn on the PPM signal output on the remote control
2. According to the following default protocol list and your receiver type, point the tuner knob (the end of the handle with the vertical groove) to the corresponding gear.
3. When the linking has been completed, turn on

Ada masalah dengan produk ini?

ULASAN PEMBELI

Toped Illustration

Belum ada ulasan untuk produk ini

Beli produk ini dan jadilah yang pertama memberikan ulasan