5.0/ 5.0
100% pembeli merasa puas
2 rating • 0 ulasan
5(2)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 40
Subtotal
Rp53.500
LEM BESI ARALDIT ARALDITE MERAH EPOXY 5 MENIT RESIN + HARDENER ADHESIVE
Rp53.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
- 100% Original Product / Produk Asli 100% -
Epoxy Adhesive / Lem Besi / Perekat Epoxi / Campur
High Performance
Fast Setting Epoxy Adhesive
Tipe: Rapid 5 Minutes / 5 Menit
Quantity: 1 Set / 1 Pasang Tabung (1 Resin + 1 Hardener)
Ukuran: 30 MiliLiter (Resin 15 ML + Hardener 15 ML)
Merek: Araldite (HUNTSMAN)
Stok: Berjalan
- The super strong, gap-filling epoxy adhesive for: Household, Industry, Workshop, and Repairs.
- Waterproof and chemical resistant.
- Bonds most materials to themselves or to one another, especially: Metal, Glass, Rigid Plastics, Wood, Ceramics, and Concrete.
- Cures fast at temperature 18 to 24 Celcius.
- Enables rapid but durable assembly and repair work.
- Cures slowly at temperatures down to 5 Celcius.
How to use:
Make sure the surfaces to be joined are clean, dry, and free from grease.
Roughen smooth, glossy surfaces.
Squeeze out equal amounts of Resin and Hardener. Mix thoroughly and use within 5 minutes (18 to 24 Celcius room temperature).
Apply mix to both joint surfaces.
Assemble parts and hold together with clamps, tape, string or weights, etc. for 10 to 15 minutes. The newly bonded joint can be handled after 3 hours and attains its full strength after about 8 hours.
Important:
To avoid contamination always replace same colour cap on same colour tube.
Will keep for 1 year if stored at ambient temperatures.
Avoid skin and eye contact. Wash hands with warm water and soap.
Huntsman Advanced Materials (Europe) BVBA
B - 3078 Everberg
Belgium
Epoxy Adhesive / Lem Besi / Perekat Epoxi / Campur
High Performance
Fast Setting Epoxy Adhesive
Tipe: Rapid 5 Minutes / 5 Menit
Quantity: 1 Set / 1 Pasang Tabung (1 Resin + 1 Hardener)
Ukuran: 30 MiliLiter (Resin 15 ML + Hardener 15 ML)
Merek: Araldite (HUNTSMAN)
Stok: Berjalan
- The super strong, gap-filling epoxy adhesive for: Household, Industry, Workshop, and Repairs.
- Waterproof and chemical resistant.
- Bonds most materials to themselves or to one another, especially: Metal, Glass, Rigid Plastics, Wood, Ceramics, and Concrete.
- Cures fast at temperature 18 to 24 Celcius.
- Enables rapid but durable assembly and repair work.
- Cures slowly at temperatures down to 5 Celcius.
How to use:
Make sure the surfaces to be joined are clean, dry, and free from grease.
Roughen smooth, glossy surfaces.
Squeeze out equal amounts of Resin and Hardener. Mix thoroughly and use within 5 minutes (18 to 24 Celcius room temperature).
Apply mix to both joint surfaces.
Assemble parts and hold together with clamps, tape, string or weights, etc. for 10 to 15 minutes. The newly bonded joint can be handled after 3 hours and attains its full strength after about 8 hours.
Important:
To avoid contamination always replace same colour cap on same colour tube.
Will keep for 1 year if stored at ambient temperatures.
Avoid skin and eye contact. Wash hands with warm water and soap.
Huntsman Advanced Materials (Europe) BVBA
B - 3078 Everberg
Belgium
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan