LINKSYS ACCESS POINT LAPN300-AP

Integrated Power over Ethernet Single Band (2.4GHz) capability and speeds up to 300 Mbps Industrial-strength Wi-Fi Protected Access (WPA, WPA2) security and data encryption IPv6 Support High Power PA for better Wi-Fi coverage Model Name: LAPN300 Network Standards: IEEE 802.11n IEEE 802.11g IEEE 802.11b Radio Frequency Bands: 2.4 GHz Ports: 1 Gigabit Ethernet Port PoE: 802.3af 802.3at LEDs: One system LED MIMO: 2x2 Antenna Type: Internal Antenna Gain: 1.8 dBi RF Transmit Power: 802.11b @ 11 Mbps: 21 dBm 802.11g @ 54 Mbps: 20 dBm 802.11n @ HT20/HT40 MCS7/15: 19 dBm Radio Frequency Channels: 2.412 to 2.462 GHz; 11 channels Receive Sensitivity: 802.11b @ 11 Mbps: -85 dBm 802.11g @ 54 Mbps: -70 dBm 802.11n @ HT20 MCS7/15: -65 dBm 802.11n @ HT40 MCS7/15: -62 dBm Maximum Power Consumption: 12.5W Dimensions (LxWxH): 243.08 x 236.98 x 43.69 mm (9.57 x 9.33 x 1.72 in) Weight: 489.88 g (1.08 lb) Operating Temperature: 0° to 40°C (32° to 104°F) Storage Temperature: -20° to 70°C (-4° to 158°F) Operating Humidity: 10% to 85% (non-condensing) Storage Humidity: 10% to 90% (non-condensing) Mounting: Wall Ceiling Desktop Number of VLANs Supported: 9, 1 management VLAN plus 8 VLANs for SSID Security Lock: Kensington Lock Slot Access Control: MAC-Based Management Interface: HTTP HTTPS SNMP Regulatory Compliance: FCC, CE, IC Class B, Wireless Event Notification: Local Log, Remote Syslog, and Email Alert Network Diagnostics: Log, Ping, Packet Capture Warranty and Support: Limited Lifetime 802.1X Supplicant: Yes External Power Amplifier: Yes Isolation of Wireless Clients in the Same SSID: Yes Reset Button: Yes Rogue AP Detection: Yes Scheduler: Yes SSID to VLAN Mapping: Yes Wireless Security: WEP WPA 802.1X RADIUS WMM: Yes Workgroup Bridge: Yes