O2 Sensor Type D-05 for Mares EANx, Uwatec, OxySpy, Divesoft Analyser

O2 Sensor Type D-05 *not for Rebreather* for Analyzers only The O2 - Scuba Diving Sensor Type D-05 has following specifications: Galvanic gas sensor with an extra water repellent head space. All characteristics are based on conditions at 25 °C, 50% RH and 1013 hPa. Electrical Connector3-pin Molex, gold-plated Measurement Range0 - 100 Vol. % Sensor Lifetime lt; 3 years @ ambient air Expected Operating Life~ 500,000 Vol.% h Initial Output Signal8 to 13 μV @ dry ambient air Response Time t90 lt; 14 sec Drift lt; 1 % volume O2 / month @ air, averaged across 12 months Linearity Error lt; 3 % @ 100 % O2, applied for 5 min Zero Offset Voltage lt; 200 μV in 100 % N2, applied for 5 minOperating Temperature0 to 45 °C Pressure Range600 to 2500 hPa Influence of Humidity-0.03 % rel. O2 reading per % RH Recommended Load Resistor≥ 10 kOhm Temperature CompensationNTC Interferencesnone to He, H2 and CO Weightapproximately 24 g Material in Contact with MediaPA, PPS, PTFE, stainless steel Storage conditionsTemperature Rangerecommended: 5 to 30 °C, maximum: -20 to 50 °C Ambient Pressure600 to 1750 hPa Humidityup to 100 % Rh Shelf Life lt; 6 months recommended mohon tanyakan stok terlebih dahulu