5.0/ 5.0
100% pembeli merasa puas
10 rating • 3 ulasan
5(10)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: 45
Subtotal
Rp99.000
REMOTE CONTROL SWITCH TRANSMITTER 3.6 – 24 VOLT DC 433MHZ - 1 MODUL 1 R
Rp99.000
Pilih ukuran: 1 MODUL 1 R
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: REMOTE CONTROL
Long range working voltage
Ultra low power,High sensitive response.
Specification:
Working voltage: DC 3.6V~24V
Maximum load: 2A
Static current: <5 mA
Working frequency: 433MHz
Reception sensitivity: <-108dBm
Size: 25.5 mm x 13mm x 5mm (length × width × high)
Input: DC 3.6V ~ DC 24V
Output: DC 3.6V ~ DC 24V
Modulation mode:ASK (superheterodyne)
Appearance size: 25.5mmx 13mm x 5mm (length × width × high)
Working mode: Momentary, Toggle, Latching Mode
Learning style: Learning Button
Working temperature: -20 degrees 80 degrees.
Specifications Of The Remote Control:
Operating frequency: 433.92MHz
Button: 4 buttons
Operating voltage: 3V
Operating Current: 12mA
Transmitting power: 10mw
Transfers distance: 50 m.
Package 1 Included: Only 1 EV1527 Learning code Remote Control * 1pcs (Battery included);
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Tiem delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s or 20s , the relay disconnect automatically.
Automatic energize when power on mode: when power supply, the relay connects.
Clearing the code :
After push the receiver's learning button 9 times , the receiver Clear all the remote control data in its memory.
When the LED flashes for 5 few times,it indicates that the clear function is completed.
(After cleared the code in the receiver,all the remote control must study from receiver onece again to restart.）
Receiver operating mode Settings
1.Learning the code :(momentary)
Push the learning key on the receiver once time ,it comes into momentary setting mode .
Wait for a moment ,the LED will be on, it comes into learning state .Push the remote button ,
LED indicato
Ultra low power,High sensitive response.
Specification:
Working voltage: DC 3.6V~24V
Maximum load: 2A
Static current: <5 mA
Working frequency: 433MHz
Reception sensitivity: <-108dBm
Size: 25.5 mm x 13mm x 5mm (length × width × high)
Input: DC 3.6V ~ DC 24V
Output: DC 3.6V ~ DC 24V
Modulation mode:ASK (superheterodyne)
Appearance size: 25.5mmx 13mm x 5mm (length × width × high)
Working mode: Momentary, Toggle, Latching Mode
Learning style: Learning Button
Working temperature: -20 degrees 80 degrees.
Specifications Of The Remote Control:
Operating frequency: 433.92MHz
Button: 4 buttons
Operating voltage: 3V
Operating Current: 12mA
Transmitting power: 10mw
Transfers distance: 50 m.
Package 1 Included: Only 1 EV1527 Learning code Remote Control * 1pcs (Battery included);
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Tiem delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s or 20s , the relay disconnect automatically.
Automatic energize when power on mode: when power supply, the relay connects.
Clearing the code :
After push the receiver's learning button 9 times , the receiver Clear all the remote control data in its memory.
When the LED flashes for 5 few times,it indicates that the clear function is completed.
(After cleared the code in the receiver,all the remote control must study from receiver onece again to restart.）
Receiver operating mode Settings
1.Learning the code :(momentary)
Push the learning key on the receiver once time ,it comes into momentary setting mode .
Wait for a moment ,the LED will be on, it comes into learning state .Push the remote button ,
LED indicato
Ada masalah dengan produk ini?