Xiaomi Mi Soundbar 2.1 with wired subwoofer Original

BARANG ORIGINAL

Kontrol input dan volume bisa lansung dari unit soundbar.
Volume bass bisa diatur lansung lewat panel belakang subwoofer.
Unit tidak menggunakan remote control
koneksi dari Soundbar ke subwoofer menggunakan kabel single RCA.


Bluetooth: V5.0
External Audio Interface: AUX Input, Optical Input, Coaxial Input, Subwoofer Output
Input Power: Subwoofer 66W (THD≤1%) Total Power 100W
Frequency Response Range: 35Hz~20KHz (-10dB)
Speaker Unit: Full frequency Speakers × 2, Tweeter × 2, Independent Subwoofer × 1
Rated Impedance: Subwoofer 4ohm, Sound Bar 4ohm
soundbar Size: 90.00 x 6.30 x 10.20 cm
Subwoofer Size: 24.00 x 24.00 x 30.60 cm
Sound bar power supply: DC 15V 2A
Subwoofer power supply: AC220V 50Hz

Package Contents:
1 x Soundbar
1 x Subwoofer
1 x Coaxial Audio Cable
1 x Subwoofer Cable
1 x Wall-mounted Accessories
1 x Manual
1 x CN Plug

Bluetooth connection method for mobile devices:
一. When the xiaomi speakers are turned on:
★Press the source input selection button, or the Bluetooth button to directly switch to the Bluetooth connection mode
★Bluetooth status indicator (blue) will flash
★Turn on the Bluetooth switch of the mobile device
★Select [MI Soundbar 2.1] in my device to complete the connection.

二. When there is already a device connection
★Bluetooth status indicator (blue) will always be on
★Press and hold the Bluetooth button for 2 seconds until the Bluetooth status indicator (blue) flashes, disconnect the current device from Bluetooth, and re-enter the Bluetooth pairing mode.
★Press and hold the volume down button and the Bluetooth button at the same time for 2 seconds, the Bluetooth pairing connection information will be deleted, and the corresponding prompt tone will be heard.