Atur jumlah dan catatan
Stok Total: 100000
Subtotal
Rp4.495.000
NAD C 245BEE 4-channel power amplifier HIGH END HOT PRODUCT
Rp4.495.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Receiver
The NAD C245BEE power amplifier delivers 35 watts per channel to four channels- ideal for bi-amping or two zones- or up to 70 watts of mono output in two zones. These may sound lower than other manufacturers' claims, but NAD measures their amps' outpuits over their full range rather than quoting what they call "brochure power".
The C245 can take signals from two sources, and has line level loop through outputs to connect more C245s to the same source. Carefully designed circuit board layouts cut distortion and minimise the signal path for the lowest possible levels of noise and interference.
If you're playing your music on the best equipment you can get you'll want to run your speakers with a power amplifier as solid and stable as the NAD C245BEE.
Amplifier power (watts) 35/channel (all four channels driven)
70 (mono, bridge mode)
Controls Bridging (outputs mono)
Trigger off/auto
Finish Graphite.
Inputs Line inputs (Channel A & Channel B, each via 2 x RCA/phono sockets and with line level loop through outputs via 2 X RCA phono)
+12v trigger in
Number of channels 4
Outputs Channel A & Channel B stereo outputs (each via 4 x 4mm banana plug/binding posts)
Product Highlights:
35 watts x 4 channels into 8 ohms (20-20,000 Hz) at 0.03% THD
bridged mode output is 70 watts x 2 channels into 8 ohms (20-20,000 Hz) at 0.02% THD
perfect for bi-amping stereo speakers, adding surround channels to a home theater system or powering music zones in a multi-room audio system
4-ohm stable for use with a wide range of speakers
signal-to-noise ratio: 95 dB
12-volt trigger/signal sensing input
high-current toroidal power transformer
two pairs of RCA preamp inputs let you play separate stereo sources in two zones
two pairs of custom gold-plated speaker binding posts
toroidal transformer
line-level 'loop through' outputs
detachable AC power cord
The C245 can take signals from two sources, and has line level loop through outputs to connect more C245s to the same source. Carefully designed circuit board layouts cut distortion and minimise the signal path for the lowest possible levels of noise and interference.
If you're playing your music on the best equipment you can get you'll want to run your speakers with a power amplifier as solid and stable as the NAD C245BEE.
Amplifier power (watts) 35/channel (all four channels driven)
70 (mono, bridge mode)
Controls Bridging (outputs mono)
Trigger off/auto
Finish Graphite.
Inputs Line inputs (Channel A & Channel B, each via 2 x RCA/phono sockets and with line level loop through outputs via 2 X RCA phono)
+12v trigger in
Number of channels 4
Outputs Channel A & Channel B stereo outputs (each via 4 x 4mm banana plug/binding posts)
Product Highlights:
35 watts x 4 channels into 8 ohms (20-20,000 Hz) at 0.03% THD
bridged mode output is 70 watts x 2 channels into 8 ohms (20-20,000 Hz) at 0.02% THD
perfect for bi-amping stereo speakers, adding surround channels to a home theater system or powering music zones in a multi-room audio system
4-ohm stable for use with a wide range of speakers
signal-to-noise ratio: 95 dB
12-volt trigger/signal sensing input
high-current toroidal power transformer
two pairs of RCA preamp inputs let you play separate stereo sources in two zones
two pairs of custom gold-plated speaker binding posts
toroidal transformer
line-level 'loop through' outputs
detachable AC power cord
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan